DeLOCK 61511 User Manual

DeLOCK 61511 User Manual

Delock converter sata / ide – esata / usb 2.0

Advertisement

Quick Links

User manual
Converter SATA / IDE – eSATA / USB 2.0
Product-No:61511
User manual No:61511-a
www.delock.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 61511 and is the answer not in the manual?

Questions and answers

Summary of Contents for DeLOCK 61511

  • Page 1 User manual Converter SATA / IDE – eSATA / USB 2.0 Product-No:61511 User manual No:61511-a www.delock.com...
  • Page 2: System Requirements

    Description The converter enables you to connect 2.5” and 3.5” IDE HDDs as well as CD- ROM, CD RW-, DVD-ROM und DVD RW drives to the USB port of your PC. You can also connect SATA HDDs to the eSATA port. Just connect the device to the IDE or SATA port of the converter by plugging the enclosed eSATA or USB cable to your PC.
  • Page 3: Hardware Installation

    Note: Follow the general instructions for installation of the converter. If necessary, read the manual of your computer, or ask a specialist for help. Hardware Installation Connecting IDE/ATA/ATAPI devices: 1. Make sure that the Jumper is set on MASTER in your device. 2.
  • Page 4 Windows 98/98SE/ME Converter for USB: 1. Switch on your computer. 2. Plug the USB cable into your Converter and the USB A male into your USB Port. 3. Switch on your converter. 4. Afterwards, Windows displays the Hardware wizard. 5. Put the driver CD in the CD ROM drive and click on "next". 6.
  • Page 5 Errors and misprints excepted. Copyright No part of this user manual may be reproduced, or transmitted for any purpose, regardless in which way or by which means, electronically or mechanically, without explicit written approval of Delock. Edition: 06/2006...

Table of Contents