Related Manuals for Treo Engineering RSX1600
Summary of Contents for Treo Engineering RSX1600
- Page 1 RS X1600 Class-D Monoblock Amplifier RS X1600 RS X1600 Installation & Operation Manual...
-
Page 2: Specifications
God void this warranty. TREO Engineering shall not be held accountable for damage caused by this amplifier to its T ABLE OF CONTENTS listeners, environment, related components, or any other damage directly or indirectly related to this amplifier. -
Page 3: Amplifier Functions
AMPLIFIER FUNCTIONS BRIDGED CONFIGURATION This should be connected to the subwoofer(s). Please use speaker cables with a minimum thickness of 12 AWG. Do not short the speaker wires to each other or to the chassis as this may damage the amplifier. Ensure that the minimum impedance is ONE OHM. -
Page 4: Troubleshooting
TROUBLESHOOTING Problem This RCA jack is used only when two RSX1600 amplifiers are used together Power LED does not illuminate. in Master/Servant configuration. The servant amplifier will receive signal Solutions input from the master amplifier on this RCA jack. The controls on the Check fuses on the amplifier and in-line with the battery. -
Page 6: Installation
INSTALLATION WIRING CONFIGURATION We recommend professional installation by an authorized TREO Engineering dealer. An in-line fuse should be installed no more than twelve inches away from the battery. An in-line fuse will help protect against short circuit and fire in your vehicle.
Need help?
Do you have a question about the RSX1600 and is the answer not in the manual?
Questions and answers