American Time Wired Tone Generator Installation And Operation Manual

Wired tone generator

Advertisement

Quick Links

Installation and Operation Manual
Wired Tone Generator
Part # H004464
Rev. 1
June 2010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wired Tone Generator and is the answer not in the manual?

Questions and answers

Summary of Contents for American Time Wired Tone Generator

  • Page 1 Installation and Operation Manual Wired Tone Generator Part # H004464 Rev. 1 June 2010...
  • Page 2: Safety Precautions

    For Masters/Signal Programmers and System Controllers To protect against shorts between power and signal circuits, all wires connected to the power and signal circuit terminals must be insulated to 300vac. Relay contact voltage must not exceed 220vac to prevent damage. © American Time...
  • Page 3 Use with AllSync Wired Master ...................... 8 Use with YMP/YBP Clock/Signal Programmer ................9 Contact Information and Customer Support ................. 10 American Time 140 3rd Street South PO Box 707 Dassel, MN 55325-0707 Phone: 800-328-8996 800-789-1882 Fax: atsclock.com © American Time...
  • Page 4: Specifications

    • Voltage Input: .... 120vac power module (included) • Enclosure....Light gray plastic Multi-Tone Generator GAIN 3.50" 4.60" SPKR 8 OHM SPKR AUDIO IN AUDIO OUT 12VDC (500 mA max) 1-800-328-8996 www.atsclock.com 2.30" 4.60" 2.80" 5.23" 5.60" Order Information Part # H004291A © American Time...
  • Page 5 • A three pulse tone repeats every 3.25 seconds for the duration of the contact input. • The Chime sounds once when the contact is closed and again when the contact is opened. © American Time...
  • Page 6 Speaker output (optional) SPKR 8 OHM SPKR AUDIO IN Connect the background audio from existing system to AUDIO OUT the Audio In. Connect the Audio Out to the input of the 12VDC existing system. (500 mA max) 1-800-328-8996 www.atsclock.com © American Time...
  • Page 7: Wiring Diagram

    See the SiteSync IQ Wireless Installation Manual before installation. Also, verify that the system controller you have has the bell circuit option. Wiring Diagram CLOCK 1 CLOCK 2 BELL 1 BELL 2 BELL 3 BELL 4 BELL 5 BELL 6 © American Time...
  • Page 8 Operating multiple tones with multiple circuits Bell Circuit 1 Bell Circuit 2 activating the 333Hz activating the 700Hz 2 pulse tone. steady tone. CLOCK 1 CLOCK 2 BELL 1 BELL 2 BELL 3 BELL 4 BELL 5 BELL 6 © American Time...
  • Page 9 C NC NO C NC NO C NO C NO C NO C NO C NO C CLOCK 1 CLOCK 2 BELL 1 BELL 2 BELL 3 BELL 4 BELL 5 BELL 6 Bottom of the AllSync Master © American Time...
  • Page 10 See the YMP Plus or YBP Plus Installation Manual before installation. Also, verify that the master you have has the circuit option. CIRCUIT CIRCUIT CIRCUIT CIRCUIT CIRCUIT CIRCUIT CIRCUIT CIRCUIT 120vac Input Black Fused 120vac White Source © American Time...
  • Page 11: Contact Information

    Contact Information Multi Tone Generator For additional support on product setup, on the tone generator or on any of the American Time products, please call or visit our web site. American Time 140 3rd St. So. PO Box 707 Dassel, MN 55325-0707...

This manual is also suitable for:

H004291a

Table of Contents