Mitsubishi Electric WL7200U User Manual page 20

Viewing computer images (continued)
Caution:
• Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord.
• Do not plug in or out the power cord with your hand wet. It may cause electric shock.
• Do not turn on the power before attaching the lens. The cabinet may be exposed to the light from the lamp
directly and heated to a high temperature, resulting in deformation.
• When you move the projector, turn off the power, unplug the power cord from the wall outlet, and then remove the
connected cords. Otherwise, the power cord may be damaged, resulting in fire or electric shock.
• If dust or metallic substance is on or around the pins of the power plug, unplug the power cord and clean it using
a dry cloth. If you continue to use the projector without cleaning, it may result in fire or electric shock. Clean the
power plug periodically at least once a year.
• Be sure to unplug the power cord from the wall outlet if the projector will not be used for a long period of time.
Otherwise, it may cause fire.
C. Installing the terminal cover
This projector includes a terminal cover. If necessary, install the terminal cover to the projector.
(a)
1. Fit two hooks of the terminal cover into the projector.
2. Tighten the attachment screws (a) firmly.
Important:
• Don't carry the projector by the terminal cover.
EN-20