Table of Contents
Advertisement
Operating Instructions and Parts Manual
Troubleshooting Chart (continued)
Symptom
Pump Leaks at shaft
Engine will not start or
run (or when you pull
rope to start, it will
not move)
Possible Cause(s)
Worn mechanical seal
1. Stone or foreign object
lodged in impeller
2. No oil in crank case
020598 and 020599
Corrective Action
Replace
1. Disassemble pump and remove
stone or foreign object
2. Fill oil to overflowing, or check
dipstick. See engine manual
10
Advertisement
Table of Contents
