The Back Panel; Setting Up - Strong Rock-Box User Manual

The Back Panel

Setting Up

1. Plug the power cable into the back of the device, and the other end into the
socket.
2. Plug the AV or HMDI (not included) cable into your TV, and the other end into the
relevant socket on the back of the device.
3. Connect an RJ45 Ethernet cable from the device to your modem/router for easy
access to your Internet connection. Otherwise the device contains Wi-Fi access to
your router out-of-the-box.
4. Turn the power on at the socket and a blue light will appear on the top of the device
indicating it's been powered on.
5. Turn on your TV and change the source to either AV or HDMI (depending on the
type of video cable you used).
6. The device will take some time to set itself up for the first time, please wait until the
device boots into the Home screen as shown on page 8 of this user manual.
7. To put your device on standby, press the power button on your remote, or the power
button at the bottom of the screen, then press OK.
*Note that changing the Source input on your TV then back again with the device
in standby will turn the device back on.
8. Connect to the Internet (via Wi-Fi or Ethernet) through the Settings app. Refer to
page 9 for more information on setting up Internet access.
9. Sign in to your existing Gmail account, or add a new one. This is required if you
would like to download apps and update existing ones. Refer to page 12 for more.
wall
7