Control And Displays; Front Panel - Cary Audio Design SL-100 Owner's Manual

CONTROLS AND DISPLAYS

FRONT PANEL

1. POWER
• Press once to turn the power ON. The power indicator will blink for thirty (30) seconds
and then stay on, at which point the unit is ready to operate.
• Press again to turn the power OFF.
2. HEADPHONE JACK
• This jack is used to listen to headphones.
3. SOURCE SELECTOR
• The input source is selected by pressing the respective buttons.
4. ALPHANUMERIC Display
• This thirteen-character display provides a wide range of information concerning the
operation of the SL-100. The information displayed depends on what the SL-100 is
doing.
• The information displayed is summarized below:
Normal Operation: Displays the selected input name and volume setting.
Balance Mode: This shows the direction (L or R) and magnitude of the balance offset.
5. VOLUME
• Use the volume control to adjust the listening level.
8