Pride Mobility Destiny Owner's Manual page 30

V I I .
MANUAL RECLINE SEATBACK ADJUSTMENT
To adjust the seatback angle:
1. Pull up on the manual recline lever to unlock the seatback.
See figure 11.
2. Lean forward or rearward to adjust the seatback to a
comfortable position.
3. Release the manual recline lever to lock the seatback se-
curely into place.
WARNING! Always keep your back pressed
fir ml y a gainst the seatback w hen
adjusting the seatback recline angle.
HEADREST HEIGHT ADJUSTMENT
To adjust the headrest height:
1. Press the headrest release button located at the base of
the headrest. See figure 11.
2. Adjust the headrest up or down to a comfortable position.
3. Release the headrest release button to secure the head-
rest in the selected position.
ARMREST ANGLE ADJUSTMENT
To adjust the armrest angle:
1. Flip up the armrest so that it is perpendicular to the floor.
2. Loosen the locking nut. See figure 11.
3. Turn the armrest angle adjustment screw clockwise to
lower the front of the armrest or anticlockwise to raise
the front of the armrest.
4. Tighten the locking nut to secure the armrest in position.
ARMREST WIDTH ADJUSTMENT
The armrest width can be adjusted inward or outward.
1. Loosen the armrest adjustment knobs. See figure 12.
2. Slide the armrests in or out to the desired width.
4. Tighten the armrest adjustment knobs to secure the arm-
rests in place.
WARNING! Do not attempt to lift or move
your scooter by any of its removable
parts, including the armrests, seat and
shroud. Personal injury and damage to the
scooter may result.
NOTE: Pivot the armrests upward to aid in getting onto
and off of your scooter.
30
C O M F O R T
www.pridemobility.com
A D J U S T M E N T S
Figure 11. Seat and Armrest Adjustments
ARMREST ADJUSTMENT KNOBS
Figure 12. Armrest Width Adjustment
HEADREST RELEASE BUTTON
ARMREST ANGLE
ADJUSTMENT SCREW
LOCKING NUT
MANUAL
RECLINE LEVER
Destiny