Nisuta 1T1R 11n PCI Adapter User Guide
1.3 Using the wireless adapter's WPS button to perform
PBC connection.
If your wireless adapter provides a WPS button,you may use
the button to perform PBC connection.
a).Run the adapter's UI and switch to STATION mode
b).Two minutes after the router's WPS-PBC is enabled,press the
adapter's WPS button to connect in PBC mode.
c).You may view the PBC connection process on the UI's PBC
screen.
2. Wireless Connections in PIN Mode
On the "Add WPS Profile" screen, select "PIN " as the WPS
Method. You may select the wireless AP to be connected in WPS
mode on the WPS AP drop-down List,or select "Auto "and then
click the next button.
-59-