Troubleshooting - Pinnacle Products International BCB-36-BDF Owner's Manual And Operating Instructions

NEVER LEAVE A FAN
OPERATING UNATTENDED
Capacitor Assembly
Troubleshooting Guide
Problem
Fan does not operate
Reduced Air Flow
Excess Noise (vibration,
slapping, squealing)
Pinnacle Products International, Inc. reserves the right to make any changes in materials,
specifications, prices or design without notice. Pinnacle Products International, Inc. may also
discontinue items at any time.
Pinnacle Products International, Inc. Portable Air Circulator Owners' Manual
Possible Cause
1. No power
2. Bad switch
3. Bad motor
1. Loose pulleys or fan blade
2. Loose or worn belt
3. Motor is humming
1. Fan is not on level ground
2. Loose pulley or belt
3. Motor bolts are not secure
4. Defective fan bearings
Specifications subject to change without notice
Portable
Air Circulator
Fan Shaft Assembly
Corrective Action
Inspect Power Cord for damage. Be sure
unit is plugged in and turned on
Replace Power Switch (Note: To prolong
life of Power Switch, it is recommended
that the fan is first operated in LOW for 5-
10 seconds before switching to HIGH).
Replace Motor.
Tighten pulley Hex Screw.
See page 3 for belt tightening instructions.
Capacitor is damaged. Replace Capacitor.
Turn off fan, and relocate unit to smooth
level surface.
Tighten Hex screw to tighten Pulley. See
page 3 for for belt tightening instructions.
Tighten Motor Safeguard bolts and 4 motor
bolts.
Replace Fan Bearings.
.
Page 5