Subscribe to Our Youtube Channel
Related Manuals for White Brothers Groove 200
Summary of Contents for White Brothers Groove 200
- Page 1 OWNERS MANUAL A Division Of Mountain Racing Products, Inc 580 N. Westgate Dr. Grand Junction, CO 81505 USA 1.970.241.3518 www.whitebrotherscycling.com...
- Page 2 *IF SERVICE BECOMES NECESSARY OR REMOVAL OCCURS, PLEASE CALL WHITE BROTHERS CUSTOMER SERVICE FOR PRODUCT EVALUATION AND DIAGNOSIS. Thank you for purchasing your new White Brothers fork. Our forks are designed to help you perform at your absolute peak. Page 2...
-
Page 3: Fork Installation
Your new White Brothers fork has oil damping and is air and coil sprung for light weight performance. The springs and damper are set stock to satisfy a wide range of rider weights and riding styles. Fine tuning can be easily accomplished by changing air pressure and external damper settings. -
Page 4: Tuning
Any less clearance can cause the tire to hit the crown resulting in serious injury or death. The Groove 200 will not work on frames with head tubes longer than 5-1/2”. To get the most from your White Brothers fork, it is important that you tune the fork to fit your style of riding and the conditions you ride in. -
Page 5: Maintenance
Never run less than 50 psi in the canister. Your White Brothers fork requires periodic maintenance to ensure peak performance and long life. Neglecting proper maintenance will reduce the fork’s life. Internal build up of water and dirt or a lack of lubrication will cause excessive wear and void the warranty. - Page 6 Disassembly of the Spring Leg Assembly (Left Hand) 1. Unscrew the top cap from the outer leg. Check for noticeable play between the stanchion tube and the outer fork tube. If there is play, contact White Brothers or a qualified dealer for service.
-
Page 7: Rebuilding The Spring Leg Subassembly
1. Unscrew the top cap from the outer leg. Check for noticeable play between the stanchion tube and the outer fork tube. If there is play, contact White Brothers or a qualified dealer for service. Slide the outer leg down to the axle clamp. -
Page 8: Rebuilding The Damper Leg Assembly
Slide the outer leg all the way down to the drop out. Check for noticeable play between the stanchion tubes and the fork lower. If there is play, contact White Brothers for service. Reinstalling the Springs and LH Top Cap 1. - Page 9 The following is an illustration and parts table which gives you the exploded view of your White Brothers fork. The parts table indicates the part Page 9...
- Page 10 ITEM NO. QTY. PART NO. DESCRIPTION 2 100021-100022 DH Outer Leg 1 P1159-1 Crown Assm. 1 P1157-110 Upper Crown 1 100046 Main Spring 1 100609 Spring Leg Assm. 1 100610 Damper Leg Assm. 1 97-3677 Axle 2 97-1351 Wiper Seal 1 101468 Seal Head 1 100600...
-
Page 11: Maintenance
MAINTENANCE LOG Date Service Performed Page 11... - Page 12 MAINTENANCE LOG Date Service Performed Page 12...
- Page 13 MAINTENANCE LOG Date Service Performed Page 13...
- Page 14 MAINTENANCE LOG Date Service Performed Page 14...
- Page 15 WARRANTY CLAIMS White Brothers forks are the highest quality and as such are warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase for the original purchaser. On receipt of the fork, if it is found to be defective, White Brothers will determine replacement or repair of the fork.
- Page 16 A Division Of Mountain Racing Products, Inc 580 N. Westgate Dr. Grand Junction, CO 81505 USA 1.970.241.3518 www.whitebrotherscycling.com...
Need help?
Do you have a question about the Groove 200 and is the answer not in the manual?
Questions and answers