Summary of Contents for Terratek TTESNG
- Page 1 Electric Stapler/Nail Gun TTESNG User Manual — Please read and retain for future reference. IMPORTANT: Read all instructions before use.
-
Page 2: Parts List
Contents Parts List Technical Information Safety Instructions Using your nailer/stapler Maintenance Warranty Parts List Part name Steel cores Coil Damping pad Steel pad Gun needle guide Gun needle Spring Lift housing Gun mouth Screw Steel cover Nail punches Wheel Nail punches spring Screw Nail groove Lock spring... -
Page 3: Exploded Assembly Diagram
Exploded Assembly Diagram NOTICE: Actual product may vary from pictures shown. - Page 4 Fig.1 1) Firing trigger 2) On/Off switch 3) Power cord 4) Gun nozzle 5) Cartridge haft 6 Switch lock button Fig.2 Fig.3 Fig.4 Fig.5 Fig.6...
-
Page 5: Technical Information
A=1.2mm A=1.2mm B=10.6mm B=2mm C=6-14mm C=15mm Technical Information Model: TTESNG Rated Voltage: 220 - 240V~ 50Hz Max. Shot: 20 shots/min Stapler: 6 -14mm Nailer: 15mm Read this entire manual before using this product. Failure to do so can result in serious injury. Save this manual for future reference. -
Page 6: Important Safety Information
Read and Keep This Manual Please read carefully all instructions within this manual. Failure to follow all safety warnings can result in serious personal injury. The term “Power Tool” in all of the following warnings refers to your mains operated (corded) or battery operated (cordless) power tool. Important SAFETY Information This symbol is to warn you of potential personal injury hazards. -
Page 7: Electrical Safety
Electrical safety Before use, ensure that the power outlet you are using matches the plug on your power tool and that the voltage of the outlet matches that of your power tool. Only use grounded extension cords with power tools fitted with 3 pin plugs and if using outdoors ensure any extension cord is suitable for outdoor use. -
Page 8: General Safety Instructions
Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Develop a periodic maintenance schedule for your tool. When cleaning a tool be careful not to disassemble any portion of the tool since internal wires may be misplaced or pinched or safety guard return springs may be improperly mounted. - Page 9 9. USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
- Page 10 26. NEVER LEAVE TOOL RUNNING UNATTENDED. Turn power off. Don’t leave tool until it comes to a complete stop. 27. Double Insulation eliminates the need for the three wire grounded power cord and grounded power supply system. This power tool is supplied with all the relevant safety guards and features, it should be checked before every operation, this manual should be read and kept in a safe place.
- Page 11 Always assume the tool contains fasteners. Keep the tool pointed away from yourself and others at all times. No horseplay. Respect the tool as a working implement. DO NOT LOAD FASTENERS with tool in compressed position to prevent unintentional firing of trigger.
-
Page 12: Package Contents
Symbols IMPORTANT: Some of the following symbols may be used on your tool. V…………………………volts A…………………………amperes Hz……………………….hertz ~…………………….….alternating current …/m………………..revolutions per minute .....class II construction (double insulated) Kg………………………..kilograms ………………………..No load speed ……………….…..Conforms to European Harmonised New Approach Directives. DC ………………..…….Direct Current Unpacking Carefully remove the product and any accessories from the box. - Page 13 Assembly 1.MAKE SURE YOU HAVE READ ALL SAFETY INSTRUCTIONS. 2.Before loading the tool, make sure switch is off and unplugged to avoid risk of accidental firing. 3.Turn around the tool so that the bolt storage faces up. Grip the handle "4" with the thumb and index finger.
-
Page 14: General Maintenance
Accessories CAUTION: Use only accessories or attachments recommended for use with your Terratek tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. - Page 15 We ACL Group (Intl.) Ltd, England DN6 8LZ declare that the Electric Stapler & Nail Gun has been manufactured according to our full quality assurance procedures. The declaration is to certify that it conforms to CE, EMC, LVD, MD and RoHS directives: EN55014-1: 2006 EN55014-2/A2: 2008 EN61000-3-2: 2006...
-
Page 16: Environmental Protection
Environmental Protection RECYCLING: WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILITIES EXIST. CHECK WITH YOUR LOCAL AUTHORITY OR RETAILER FOR RECYCLING ADVICE. Please read the following carefully ACL Group (Intl) Ltd. and/or it’s distributor has provided the parts list and assembly diagram as a reference tool only.