Page 2
Setting the IP Address Using DHCP... 10 3.2.7 Setting the IP Address Using the Control Center ... 10 3.2.8 Setting the IP Address Using the Server’s Web Pages ... 12 3.3 Naming Your USB Devices ... 14 3.3.1 Printer Names... 14 3.3.2...
Page 3
Using Shared Storages by SMB/CIFS Method for Windows ... 46 6.5.4 Using Shared Storage by FTP Methods for Windows... 47 CHAPTER 7 SCAN SERVER ...48 7.1 Connecting HP All-In-One to the Server... 48 7.2 Using the Shared Scanner in Windows... 49 7.2.1 Using the Control Center... 49 7.2.2 Using Windows Applications ...
Page 4
14.4 Default Parameters List ... 81 CHAPTER 15 UPGRADE FIRMWARE ...83 CHAPTER 16 THE INIT BUTTON...85...
Page 6
Power Indicator is lit while power is applied. If it is not lit, or if it blinks, there is a problem with this Server or power adapter. Link Status is lit while network is applied. If it is not lit, it indicates that this server does not connect to the network.
Page 17
“Apply” Note: If you want to install HP all-in-one series printer drivers in Windows, you are advised to connect the MFP to PC during installation. If your printers are network enabled, few more methods of setting up your printers are available, depending on specific network environments and equipment.
Page 18
" Step 6 Server USB Printer . < $ LAN HUB/Switch Server USB Printer " & & LAN HUB/Switch & & " Router Internet Router ; #/ ; #/ LAN HUB/Switch...
Page 53
" 1. Insert the included CD into the personal computer. The Autorun screen as in the following should appear. 2. Click Install Application button. 3. Click Next, if you see any Next button in installation windows. 4. Click Finish. & &...
Page 83
1. Open Control Center. It will automatically search the existing Servers and display their statuses. 2. Select the Server that you want to upgrade the firmware. Double click the selected Server and enter Administrator (default: admin) and Password (default: admin).
Page 84
3. First, run Control Center. It will automatically search for Servers on the LAN. Then Servers’ IP addresses will be shown in Control Center. 4. Run any Web browser, like Microsoft Internet Explorer. Go to “http://Server’s IP address “or “http://Server’s Host Name” to access the Server's home page.
Page 85
3. = 4 *( @G &@D H &@&888 4. 4 $ ( & 5. 9 & " " '& " & & " " --------------------------------- END --------------------------------- 1 $ & "" 1 @G &@D H &@&@ & " " C C & C C & C C & & "...