Product Overview; Charging; The Microsd Card - Komando KIM606 User Manual

CHARGING

When the unit is powered off and charging, the red indicator light
will illuminate. When charging is complete, the red light will go
off. While the unit is powered on, charging is indicated by the
appearance of a power cord in the top right of the screen.
•
An initial charge of 6 hours is recommended.
•
Leaving the Dash Cam constantly connected to the car charger
will not harm the battery.
•
To charge the Dash Cam, connect the 12v car charger to your
car's 12v port and connect the other end to the Dash Cam. You
can also connect the USB connector to your computer's USB port
and the other end to the Dash Cam.
•
The Dash Cam is designed to automatically power on and
record when plugged in.
•
The Dash Cam is designed to automatically power off and save
your video when unplugged
THE MICRO SD CARD
Insert the microSD card into the microSD card slot until you hear
a click; the drawing outlined on the camera indicates the correct
direction.
Removing the microSD card: Push the card in until you hear a
click and the card bounces out.
Note: You will be prompted to format the SD card when using the unit for the
first time; perform this step. It is recommended that you format the SD card
every time inserting a new card. Once the SD card has been formatted in this
camera, it must be formatted in a computer for use with any other camera.
3

Product Overview

SD card insert