Replacing The Front Usb/Card Reader/Audio Module - Lenovo H535s Hardware Maintenance Manual

Hide thumbs Also See for H535s:
Table of Contents

Advertisement

Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to "Left and right view"
and "Rear view" for help with locating the various connectors.
Step 4.
Remove the computer cover. Refer to "Removing the computer cover".
Step 5.
Disconnect the 2 antenna cables from the Wi-Fi card.
Step 6.
Remove the 2 screws that secure the Wi-Fi card to the motherboard.
Step 7.
Pull the Wi-Fi card upward to remove it from the card port.
Step 8.
Install the new Wi-Fi card:
a.
Line up the new Wi-Fi card, then insert it into the same card port.
b.
Secure the Wi-Fi card to the motherboard with the 2 screws.
c.
Connect the 2 antenna cables to the new Wi-Fi card.
Step 9.
Reattach the computer cover.

Replacing the front USB/card reader/audio module

Note: For this procedure, it helps to lay the computer flat.
To replace the the front USB/card reader/audio module:
Step 1.
Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Unplug all power cords from electrical outlets.
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to "Left and right view"
and "Rear view" for help with locating the various connectors.
.
Chapter 8
Replacing hardware
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents