Outside Temperature Display; Outside Temperature Display And Digital Clock - BMW 318i Owner's Manual

Outside temperature display and digital clock*

Memo mode
Press the MEMO key to activate or
deactivate the signal. When MEMO is
active, a tone symbol appears in the
right display. The signal sounds every
hour at the pre-programmed time or
without programming 15 seconds
before each full hour.
Outside temperature
Data request: Press TEMP key.
If the outside temperature drops below
37.5 5F (+36), a warning signal sounds,
the temperature display automatically
appears and the unit of measure flashes
for 8 seconds.
The warning is repeated whenever the
temperature has increased to 43 5F
(+66) at least once before falling to
37.5 5F (+36) again.
a
The temperature warning device
does nothing to alter the fact that sur-
face ice can still form at temperatures
above 37.5 5F (+36), e.g., on bridges
and on shade-covered road surfaces.c
Entries
All numbers for the time and date are
entered with the entry keys according
to the following principle: The numbers
can be entered in any order. Each time
the key is pressed, or for each half sec-
ond the key is held down, the numerical
value increases by one.
Pressing the key longer starts the rapid-
advance function.
After a power failure
The dots in the display flash.
d
Press the scale selection key as
required.
d
Enter the time with the h/DAT and
min/DAT entry keys.
d
Press SET. The clock starts.
d
Press the HR/DAT key.
d
Enter the date with the entry keys.
d
Press SET.
d
Confirm the year by pressing the SET
key or correct with the entry key and
complete the number entry by press-
ing the SET key.
Online Edition for Part No. 01 41 9 790 377 - © 07/98 BMW AG
69