Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Rush Pin 1 CW
-
Page 1: User Manual
Pin 1 CW User Manual Professional Entertainment Technology... - Page 2 The Martin logo, the RUSH by Martin logo, the RUSH by Martin name, the Martin name and all other trademarks in this document pertaining to services or products by Martin Professional A/S or its affiliates and subsidiaries are trademarks owned or licensed by Martin Professional A/S or its affiliates or subsidiaries.
-
Page 3: Table Of Contents
Fastening the fixture to a flat surface ............8 Mounting the fixture on a truss ..............8 AC power ......................9 Maintenance ....................10 Cleaning ...................... 10 Service and repairs ..................11 Troubleshooting ....................11 Specifications ....................12 RUSH Pin 1 CW user manual... -
Page 4: Safety Information
Keep this manual for future use. If you have questions about how to operate the fixture safely, please contact your RUSH by Martin™ dealer or call the Martin™ 24-hour service hotline on +45 8740 0000, or in the USA on 1-888-tech-180. - Page 5 To minimize the risk of eye irritation or injury, disconnect the fixture from power at all times when the fixture is not in use, and provide well-lit conditions to reduce the pupil diameter of anyone working on or near the fixture. RUSH Pin 1 CW user manual...
- Page 6 Never attempt to use a fixture that is obviously damaged. Do not modify the fixture or install other than genuine RUSH by Martin™ parts. Refer any service operation not described in this manual to a qualified technician.
-
Page 7: Introduction
Introduction The Pin 1 CW is a small, powerful pinspot incorporating a single 10 W long-life LED. It provides two focusable beam angles—7° and 11°—and is ideal for projecting onto mirror balls or other applications for mobile DJ’s or small fixed installations. -
Page 8: Physical Installation
Working from a stable platform, hang the fixture on the truss. Tighten the rigging clamps and hardware. 4. Secure the fixture against clamp failure with a secondary attachment such as an approved safety cable that is rated for the weight of the fixture. RUSH Pin 1 CW user manual... -
Page 9: Ac Power
The fixture has an auto-ranging power supply that accepts AC mains power at 100 – 240 V, 50/60 Hz. Do not apply AC mains power that is not within this range. RUSH Pin 1 CW user manual... -
Page 10: Maintenance
Check again at frequent intervals. This procedure will allow you to assess cleaning requirements in your particular situation. If in doubt, consult your RUSH by Martin™ dealer about a suitable maintenance schedule. -
Page 11: Service And Repairs
Never try to repair the fixture by yourself as this may result in damage or malfunction and it may void your product warranty. The equipment must only be serviced or repaired by an authorized RUSH by Martin™ service technician. Installation, on-site service and maintenance can be provided worldwide by the Martin Professional Global Service organization and its approved agents, giving owners access to Martin’s expertise and product knowledge in a... -
Page 12: Specifications
Protection rating ..................IP 20 Installation Mounting ........Adjustable bracket, surface or truss mount Orientation....................Any Location ................For indoor use only Connections AC power input ........1.5 m (4.9 ft.) cable tail w/o power plug RUSH Pin 1 CW user manual... - Page 13 Specifications are subject to change without notice. For latest product specifications, see www.martin.com Disposing of this product RUSH by Martin™ products are supplied in compliance with Directive 2012/19/EC of the European Parliament and of the Council of the European Union on WEEE (Waste Electrical and Electronic Equipment), where applicable.
- Page 14 RUSH Pin 1 CW user manual...
- Page 16 I n n o v a t i o n Q u a l i t y P e r f o r m a n c e ...
Need help?
Do you have a question about the Pin 1 CW and is the answer not in the manual?
Questions and answers