HP mp3220 series User Manual page 41

Adjust picture (continued)
Tint
Red
Green
Blue
Color space
Reset color settings
Shape settings...
Keystone
Reset keystone
Widescreen input
VGA settings...
Auto-sync
Frequency
Tracking
Vertical offset
Horizontal offset
Reset video settings
User's Guide
Shifts colors toward red or green.
Adjusts the amount of red in the picture.
Adjusts the amount of green in the picture.
Adjusts the amount of blue in the picture.
For certain component inputs, selects the type of
signal encoding used by the input source. You can
override the selection made by the projector.
Resets these color settings to their default settings.
Adjusts the shape of the picture.
Corrects the slanted sides of an image.
Resets keystone correction to zero.
Sets whether a widescreen (16:9) input device is in
use.
Adjusts settings for the VGA input port.
Resynchronizes the projector to the input signal from
a computer. This can compensate for any change in
the signal.
Adjusts the timing of the projector relative to a
computer graphics card.
Synchronizes the projector to a computer graphics
card.
Shifts the image up or down within the projection
area.
Shifts the image left or right within the projection
area.
Resets all video settings to default settings.
Adjusting the Projector
41