Re-Connecting To A Bluetooth Device - NuForce BT-860 User Manual

3) Pair and connect the headset with a Bluetooth mobile phone
(refer to "pairing the headset with a Bluetooth mobile phone");
4) Switch on the Bluetooth transmitter. It will automatically connect
to the headset.
Remarks:

After successful multi-pairing, the paired devices will
remember each other. They will not need to pair again. If the
pairing information is deleted, connect the mobile phone with
the headset and turn on the Bluetooth transmitter, thereby
achieving multi-connection.

For mobile phones supporting both HSP and A2DP, when
setting up HSP and A2DP connection with the headset
simultaneously, the Bluetooth transmitter may not connect to
the headset.

3. Re-connecting to a Bluetooth device

1) Automatic connecting
Every time the headset is switched on, it will automatically
connect to last connected device.
2) Manual connecting
When the headset is in standby mode, short press MFB button
once. It will connect to last connected device.
382 South Abbott Ave, Milpitas, CA 95035, USA • www.nuforce.com
EMAIL: salesteam@nuforce.com
13