Page 1
DuraTime Digital Clock Installation and Operation Manual BRG Precision Products 600 N. River Derby, Kansas 67037 http://www.DuraTimeClocks.com sales@brgproducts.com 316-788-2000 Fax: (316) 788-7080 Updated: 12/8/2011...
Page 2
Up or Down buttons. The time will increment or decrement faster and faster as the buttons are held. If the clock is within range of a DuraTime master clock, the clock will change to the master clock time within a second or two.
Page 3
DuraTime Clock Processor Configuration Menu Processor Type When the clock is displaying the time, Press the Up button to advance the time, or the Down button to decrement the time. The longer the buttons are held down, the faster the time will change. Press the Mode button to enter modes listed below.
Page 4
First Menu Value Mode Description and Instructions Level Range Mode Number Pressing the Up button advances the year, pressing the Down button decrements the year. Blinking Colon This mode configures various colon and sync indicator functions. 0= solid colon with no leading zero, 1=blinking colon with no leading zero 2=no colon with no leading zero 3=no colon with leading zero (display modes 2, 5, 17)
Page 5
First Menu Value Mode Description and Instructions Level Range Mode Number -12 to 12, 0=default This feature allows adjusting time received over a serial sync line to the local time. 30 minute offsets are not available. Leading Zero on Selected Display Modes 0=disabled, 1=enabled When enabled, leading zeros will appear on display modes 2, 5, and 17.
Page 6
First Menu Value Mode Description and Instructions Level Range Mode Number minutes on display 1 and a temperature alternating between degrees F and degrees C on display 2, using temperature sensor port 1, then set Modes 31=2, 32=2, 34=24 and 35=25.
Page 7
Illuminate All Display Segments Pressing the Mode button momentarily will illuminate all display segments on all displays. Pressing the Mode button again will return to the menu. Test Watchdog Timer The DuraTime clock processor includes a hardware watchdog timer. If for any reason...
Page 8
First Menu Value Mode Description and Instructions Level Range Mode Number the clock becomes unstable for enters an endless program loop, the watchdog timer will automatically restart the clock. The watchdog timer operation may be tested by placing the clock into an endless program loop. Press the Mode button once to test the clock.
Need help?
Do you have a question about the DuraTime and is the answer not in the manual?
Questions and answers