Set Owner Name; Software Revision; Start-Up Screen - GE MDS 4790M Installation And Operation Manual

52
Table 13. Front Panel Screens—Diagnostics
FRONT PANEL
SCREEN PC COMMAND
Active Radio Status STAT
Details, page 61 Details, page 41
Clear Logs LOG [CLR]
Details, page 62 Details, page 36
Event Log LOG [CLR]
Details, page 62 Details, page 36
S/N Ratio SNR, SNR!
Details, page 61 Details, page 41
Show Temperature and TEMP
Voltages Details, page 42
Details, page 62

Start-up Screen

Details, page 53
Transmitter Status
Details, page 62
Table 14. Front Panel Screens—Owner and Radio Information
FRONT PANEL
SCREEN PC COMMAND
Serial Number SER
Details, page 62 Details, page 40
Set Owner Message OWM [xxxxx]
Details, page 60 Details, page 37

Set Owner Name

OWN [xxxxx]
Details, page 59 Details, page 37

Software Revision

SREV
Details, page 62 Details, page 41
Start-up Screen
Details, page 53
Unit Address UNIT [10000–65000]
Details, page 57 Details, page 44
MDS 4790M (MPT 1411) I/O Guide
DESCRIPTION
Display alarm conditions
Clear the event log
Display events logged by the active trans-
ceiver board
Display the signal-to-noise ratio in dBm
Display the radio's internal temperature and
voltages
Display the radio name, owner name, owner
message, and any alarms
Display the transmitter state (keyed or
dekeyed)
DESCRIPTION
Display the active transceiver board's serial
number (not the radio serial number)
Set or display the owner message or site
name
Set or display the owner name or system
name
Display the internal software part number and
version number
Display the radio name, owner name, owner
message, and any alarms
Displays the radio's unit address
MDS 05-3628A01, Rev. B