Important Safety Information; Regulatory Compliance - Logic Digital DP2140 User Manual

Important Safety Information

Please read carefully and keep the following instructions and safety information. Heed all
warnings and follow all instructions.
• Do not remove covers. There are no user serviceable parts inside, please refer
servicing to qualified service personnel.
• This equipment must be earthed.
• Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Servicing is required when the apparatus has been damaged in any way, such as the
power supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.

Regulatory Compliance

This product complies with both the EMC Directive (89/336/EEC) and the Low Voltage Directive
(73/23/EEC) as issued by the Commission of the European Community.
Compliance with these directives implies conformity with the following European standards:
• EN60065 Product safety
• EN55103-1 Electromagnetic Interference (Emission)
• EN55103-2 Electromagnetic Susceptibility (Immunity)
This product is intended for operation in the E2 (commercial & light industrial) and E3 (urban
outdoors) Electromagnetic Environments.
User Guide version 3
Logic Digital Controller
Page 5 of 31