Advertisement
Using BoomBUDDY with MP3 Player, Home Theater System, or
Any Other Device with 3.5mm Audio Output
Connect the (b) AC power adapter to the (5) AC power jack on the back of the
BoomBUDDY Speaker. Plug the (b) AC power adapter into an AC wall outlet. Turn
the (1) Control knob clockwise to turn the power ON. The (6) LED power indicator
will glow amber to indicate power flow. Connect the (c) 3.5mm audio cable from
your music device to the (4) AUX input on the back of the BoomBUDDY. Use the
controls on your music device to select a song and control music settings. Use the
(1) Control knob to adjust the volume.
*Volume can also be adjusted on your iPod, iPhone, MP3 Player, or other device.
Troubleshooting
The LED power indicator is not glowing
- Please make sure the BoomBUDDY is properly connected to power.
- Make sure that the power is ON by turning the (1) Control knob clockwise.
There is no sound
- Please make sure the BoomBUDDY is properly connected to power.
- Turn the volume up to an audible level using the (1) Control knob.
- Verify that all cables are plugged in correctly.
- Try testing the BoomBUDDY with another audio source to verify there is not an
issue with the device you are using.
The sound is distorted
- Many times the quality of your MP3, WAV, MIDI, WMV, MP4 or other music file
can affect the quality of the sound being produced. Please make sure that your
music file is to the quality you expect.
- Try lowering the volume on the BoomBUDDY and turning the volume up on
your audio device.
- Be sure youre device is properly seated in the (2) iPod/iPhone charging dock.
Advertisement
