Summary of Contents for Gigaware 25-1199
- Page 1 25-1199 User’s Guide ® Pico Projector Please read this user’s guide before using your new projector.
-
Page 2: Package Contents
Package Contents • Projector • Battery • AC Adapter • Tripod • Tripod Bracket • RCA / VGA Y-Cable • User’s Guide • Quick Start Features • Projects up to a 50 in (127 cm) image onto any flat surface •... -
Page 3: Connect To External Devices
Connect to External Devices Connect to a computer: Plug the 15-pin VGA end of the RCA / VGA Y-Cable into your computer’s VGA port and the other end into the projector. Connect to other devices: 1. Plug one end of a composite A/V cable into your device (optional adapters not included) and the other end into the RCA / VGA Y-Cable, matching cable colors. - Page 4 – OR – Match the colors on the cable with the colors on your device’s A/V Out jacks. – OR –...
-
Page 5: Focus Wheel
Vol. + / Vol. – Built-in Focus Wheel Power Increase or Speaker Slide the switch in Rotate to adjust decrease volume. the direction of the focus. arrow to turn the projector on. Power Indicators Red and Green – Power is on and AC power is connected to charge the battery. -
Page 6: Charge The Battery
Notes: • Adjust computer resolution to 800x600 and the frequency to 60Hz to avoid fuzzy projections. • The built-in speaker will have no sound output if both VGA and A/V cables are connected to source devices. • For better sound quality, try lowering the volume of your A/V source device. - Page 7 Handling and Disposal • Do not burn or bury batteries. Do not puncture or crush. Do not disassemble. • Recycle lithium batteries. Do not dispose of in the trash. • Never allow loose cells to short circuit against battery tabs or other conductive items.
-
Page 8: Troubleshooting
Troubleshooting Problem Cause Solution Built-in speaker has Volume is low. Press Vol + to turn no sound up the volume. Disconnect one of Both VGA and the devices. Mini-AV cables are connected to A/V source devices. Poor sound quality Audio coming in Lower the volume exceeds 0.5W. -
Page 9: Specifications
Problem Cause Solution The power indicator Battery may be Charge the battery. does not light and depleted (See Charge the the projector will not Battery on page 6.) turn on Connect and operate projector with AC power. (See Connect Power on page 3.) Specifications Aspect Ratio .................. -
Page 10: Limited Warranty
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Product Pico Projector Model 25-1199 Responsible Ignition L.P . Party 3102 Maple Ave Suite 450 Dallas, TX 75201... - Page 11 of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. IGNITION L.P . EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION...
- Page 12 This product is not designed, manufactured, sponsored or endorsed by Apple, Inc. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. © 2010. Ignition L.P . All rights reserved. Printed 07A10 Gigaware is a registered trademark used by Ignition L.P . in Taiwan 25-1199...