Related Manuals for Incriminator Audio IA20.1
Summary of Contents for Incriminator Audio IA20.1
- Page 1 OWNER'S MANUAL "No Chrome, No Carbon Fiber, No BS!! Period.." http//www.incriminatoraudio.com IA20.1 Digital Class-D Linkable Mono Block Amplifier Before operating this unit, please read this manual and keep it for future reference...
- Page 2 Once again congratulations, and THANK YOU for being a valued Incriminator Audio customer! Contact us: Incriminator Audio 2935 Hwy.
- Page 3 FEATURES & SPECIFICATIONS Digital Class-D Linkable Mono Block Amplifier Exclusive Bullet Proof Technology Layering Daisy-Chain Through Output RCA for Strapping 1 ohm Stable and 2 ohms Stable when Strapped Dual MOS-FET PWM Power Supplies 24 dB Low Pass (LPF) Crossover Variable - 35 Hz to 250 Hz 24 dB Subsonic Filter Variable - 10 Hz to 60 Hz Selectable Switch for Master and Slave Operation Multi-Layer Protection - Speaker Short, Over Current, Thermal, and DC Protection Circuit...
- Page 4 SINGLE AMP RCA CONNECTION If no sound, please check the MASTER/SLAVE switch. The mode switch should be in MASTER position, if in SLAVE position the unit will not play HEAD UNIT MASTER & SLAVE RCA CONNECTION to SLAVE UNIT "SLAVE INPUT" "MASTER UNIT"...
- Page 5 POWER CONNECTIONS To +12V DC GROUND to REMOTE Turn-on from HEAD UNIT Caution This amplifier is not supplied with an internal fuse. Make sure you install an in-line fuse from CAR STEREO HEAD UNIT the + Terminal of the battery. We recommend a 200 amp fuse.
- Page 6 SINGLE AMP SPEAKER CONNECTION 1~4 ohms 2~8 ohms Please note that this unit is a mono block unit and only has one channel Speaker A and Speaker B are just labeled for clear illustration. Hooking to either the positive or negative of either of the two connections will end in the same result as both positive connection and negative connection are tied together inside the unit.
- Page 7 RCA s together on the bottom section of page 3 complete strapping. Incriminator Audio amplifiers strapped together create massive amount of power, please check the rating on your subwoofers to make sure there power handling is not exceeded.
-
Page 8: Trouble Shooting
Check a good ground and for speaker shorts. Disconnect all RCA inputs from the amplifier. If hiss/noise disappears, check it with a good RCA interconnect. Then check the component driving the amplifier. Copyright 2008, Incriminator Audio, LLC. All Rights Reserved.
Need help?
Do you have a question about the IA20.1 and is the answer not in the manual?
Questions and answers