Table of Contents
Advertisement
2
Adjustments
This chapter shows you how to align the monitor. You do not have to
perform every adjustment procedure each time you align the monitor.
However, you should check all adjustments in the order shown, because
many adjustments affect each other. If a setting is already correct, you
can skip that adjustment and go on to the next one.
You must use the screen alignment test patterns to make all adjustments.
Use Section 2.1 to set up the monitor for adjustments.
Use a metric measuring tape (PN 29-25342-00) or a plastic ruler to
measure the dimensions of the screen display. To avoid scratching the
screen with the tape's metal clip, start the measurement at 10 cm (100
mm). Make sure all adjustments are made under these conditions.
14
Advertisement
Table of Contents
Troubleshooting
