Synology 406 Series User Manual page 12

LED Indicators Power Button
Rear View
DC in 12V
Article Name Location
Power Button Front Panel The Power Button is used to turn Synology Server
LED Front Panel The LED indicator is used to display the status of
indicators
USB Port Front Panel Synology Server offers 2 USB ports for adding
Fan Back Panel
Ventilation
RESET Back Panel
Button
LAN USB
RESET
Description
On or Off.
1. It will take approximately 30 seconds to 1
minute to turn on Synology Server.
2. To turn Off Synology Server, press the Power
Button until you hear a "beep" and the Power
LED begins blinking. The shutdown process
will complete in 30 seconds.
the internal disk and the system.
additional external hard drives, USB printers, or
other USB devices.
The fan is to exhaust waste heat out of Synology
Server. It will start automatically when the server
starts. If the fan is malfunctioning, system will "beep"
every 1 second.
1. To restore IP, DNS, passwords for the "admin"
account to default value, and reset the "guest"
account to the "enabled" status. (Please refer
to "Resetting
chapter.)
2. To reinstall the Synology Server. (Please refer
to "Reinstalling Synology Server" chapter.)
LED Indicators
Fan
Administrator Password"
11