Advertisement
Change of the angle
● If the change of the angle is required after the installation,
please consult the dealer or ask the qualified technicians
to do it.
Please take the TV set from the wall bracket when changing the angle.
The operation must be done by more than 2 people.
Adjust the angle of the TV set
The angle of the steel mount can be changed within 0°, 5°, 10°, 15° .
(1) Remove the TV set from the wall bracket following the disassembly steps
(2) Set the angle of the TV set by following the step 3-(2)
(3) Install the TV on the wall bracket by following the step 4-
Change and extension of connections
● If the extension and change of the connection is required
after the installation, please consult the dealer or ask the
qualified technicians to do it.
Please remove the TV from the wall mounting before extending or changing the connections.
The operation must be done by more than 2 people.
Extension and change of connection of the TV
(1) Remove the TV set from the wall bracket following the disassembly steps
(2) Proceed the extension and change with reference to the operation manual of the TV host
● Please put the separate terminal enclosure back to the TV set after the operation.
(3) Install the TV on the wall bracket by following the step 4-
C100047_WAL14C_EN.indd
15
16
in "Assembling and installation"
13
in "Assembling installation".
14
16
in "Assembling installation".
14
15
2010/12/15
13:34:15
Advertisement
