Table of Contents
Advertisement
Quick Links
"
"
"
" User's guide
Application:
! Eight inputs multiplexer unit of the Adash 3600 on-line monitoring system
! Extending the set with eight input measuring channels (AC or DC)
Characteristics:
! Connection up to 8 sensors of vibrations (AC version) or of process values (DC version)
! Built-in ICP power supply units to supply connected accelerometers
! Display measuring channel number, whose data are displayed on the MAIN unit just now
! Three operating modes
! User configuration of measuring channels via the Adash 3600 Setup program
! User definition up to four different measurements for each channel via the Adash 3600 Setup
program
! Capability to connect up to 8 these modules to one Adash 3600 set
ADASH Ltd., Czech Republic, tel.: +420 596 232 670, fax: +420 596 232 671, email: info@adash.cz
For next technical and contact information visit www.adash.net, www.adash.cz
Multiplexer
Adash 3600-MPX
- ALL
cyclic display data of all set channels
- USER display data of the selected channel
- MAX
display data of the channel with the highest vibrations
Ref: 07022003 KM
Advertisement
Table of Contents
Summary of Contents for Adash 3600-MPX
- Page 1 ! User configuration of measuring channels via the Adash 3600 Setup program ! User definition up to four different measurements for each channel via the Adash 3600 Setup program ! Capability to connect up to 8 these modules to one Adash 3600 set Ref: 07022003 KM ADASH Ltd., Czech Republic, tel.: +420 596 232 670, fax: +420 596 232 671, email: info@adash.cz...
-
Page 2: Table Of Contents
Recommended Procedure of Module Connection............. 8 Technical Specification of Adash 3600-MPX ..............12 Dimensioned Sketch of Adash 3600-MPX ...............12 ADASH Ltd., Czech Republic, tel.: +420 596 232 670, fax: +420 596 232 671, email: info@adash.cz For next technical and contact information visit www.adash.net, www.adash.cz... -
Page 3: Terminal Board Of The Adash 3600-Mpx Module
ICP supply and the signal, - ICP negative pole of the supply and the signal, SHLD sensor cable shield. ADASH Ltd., Czech Republic, tel.: +420 596 232 670, fax: +420 596 232 671, email: info@adash.cz For next technical and contact information visit www.adash.net, www.adash.cz... -
Page 4: Description Of Adash 3600-Mpx
Adash 3600-MPX Description of Adash 3600-MPX The Adash 3600-MPX module serves to connect up to 8 sensors with ICP supply to the Adash 3600-MAIN module. The original one-channel basic set Adash 3600 thus becomes multi-channel and enables cyclic measurement on all the mounted measurement channels, if extended with this module. - Page 5 As soon the valid values measured at the selected channel are displayed on the displays, the decimal point switches off. ADASH Ltd., Czech Republic, tel.: +420 596 232 670, fax: +420 596 232 671, email: info@adash.cz For next technical and contact information visit www.adash.net, www.adash.cz...
-
Page 6: Extending The Set With The Adash 3600-Mpx Module
Extending the Set with the Adash 3600-MPX Module The connection of the Adash 3600-MPX module to the Adash 3600 set is done according to the following schematic: Fig. Schematic of connection of the 3600-MPX module to the Adash 3600 system ADASH Ltd., Czech Republic, tel.: +420 596 232 670, fax: +420 596 232 671, email: info@adash.cz... -
Page 7: The Set With A Number Of Adash 3600-Mpx Modules
The Set with a Number of Adash 3600-MPX Modules Fig. Interconnection of MPX output (OUT) terminal connectors ADASH Ltd., Czech Republic, tel.: +420 596 232 670, fax: +420 596 232 671, email: info@adash.cz For next technical and contact information visit www.adash.net, www.adash.cz... -
Page 8: Recommended Procedure Of Module Connection
Pay attention to the correct polarity of the supply voltage! The positive voltage is always at the first terminal connector on the left. ADASH Ltd., Czech Republic, tel.: +420 596 232 670, fax: +420 596 232 671, email: info@adash.cz For next technical and contact information visit www.adash.net, www.adash.cz... - Page 9 A of RS-485 black conductor, signal B of RS-485. 5. Connection of terminal connectors of the output signal from the Adash 3600-MPX module (+OUT, -OUT) to the input terminal connectors of the Adash 3600-MAIN module (+ICP, -ICP) via a shielded conductor.
- Page 10 Fig. Interconnection of signal terminal connectors of the 3600-MAIN and 3600-MPX modules 6. Connection of vibration sensors. To connect vibration sensors with ICP supply to the Adash 3600 set, a special shielded twisted cable is supplied, which is marked and connected as follows:...
- Page 11 Channel 7 Fig. Connection of channels 7 and 8 7. Replace the terminal connector covers. The extension of the Adash 3600 set with the 3600-MPX module is completed and the system is ready for measurement. NOTICE. Each module of Adash 3600 system has individual unique internal address on RS-485 - see User's guide Vibration Monitoring System Adash 3600 (3600main-com-pwr_man_en.pdf - List of...
-
Page 12: Technical Specification Of Adash 3600-Mpx
- DIN rail Dimensioned Sketch of Adash 3600-MPX 33 mm 106 mm 48 mm 58 mm ADASH Ltd., Czech Republic, tel.: +420 596 232 670, fax: +420 596 232 671, email: info@adash.cz For next technical and contact information visit www.adash.net, www.adash.cz...
Need help?
Do you have a question about the 3600-MPX and is the answer not in the manual?
Questions and answers