Xantech XA8C Installation Instructions Manual

Xtc and xtc reference series ceiling and in-wall speaker systems

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS

Ceiling and In-Wall Speaker Systems
INTRODUCTION
The XTC and XTC Reference series loudspeakers are the result of Xantech's commitment to build
the best speakers possible. In their quest for perfection, Xantech engineers examined every aspect of
their performance and design, from electronic components to structural material, even how they
interact with the home environment. The Result: Flawless performance that you never thought
possible from an installed speaker.
• Pivoting Tweeters
Pivoting dome tweeters provide brilliant highs, and allow the sound field to be adjusted to fit the
specifics of the listening environment. In-wall speakers can accept a Dinky Link™ IR receiver for a
convenient, discreet mounting solution. In-ceiling speakers have an aerodynamic
dome-shaped
tweeter housing that eliminates woofer sound-wave restriction.
• FIM
FIM (Flexible Impedance Matching) binding posts provide a more dependable solution for adding a
second pair of speakers to a room or zone. One post is set for 6 ohms, delivering maximum SPL.
Another flexible post provides 8 ohms for attaching two speaker pairs in parallel without harming the
amplifier.
• XTC Technology
Xantech XTC technology delivers amazing sound quality. Custom-designed crossovers deliver a
pure, smooth tonal range that goes beyond the typical expectations of an installed speaker.
• High-density MDF Baffles
The In-Wall baffles are constructed with the same high-density MDF wood material found in premium
box speakers. An MDF based speaker provides sonic clarity by reducing vibrations and resonance.
The XTC baffle design increases dynamics, provides solid bass and midrange performance.
• SoundPATH Bridge Design
The XTC Reference In-Ceiling baffles are designed to eliminate the adverse-effects of having the
tweeter placed directly over the woofer. SoundPATH's solid-density bridge design provides sonic
clarity by reducing vibrations and resonance. An aerodynamic shape eliminates woofer sound-wave
restriction.
• XA and XB Series
The XTC series is also known by the model numbers as the XB series. The XTC Reference series is
also known by the model numbers as the XA series.
08905092C
- 1 -

Advertisement

Table of Contents
loading

Summary of Contents for Xantech XA8C

  • Page 1: Installation Instructions

    Ceiling and In-Wall Speaker Systems INTRODUCTION The XTC and XTC Reference series loudspeakers are the result of Xantech’s commitment to build the best speakers possible. In their quest for perfection, Xantech engineers examined every aspect of their performance and design, from electronic components to structural material, even how they interact with the home environment.
  • Page 2: Application - Single Zone

    APPLICATION – SINGLE ZONE A single zone setup can be created using an audio receiver, general purpose amplifier, or a multi- room amplifier. The figure below shows a typical stereo left and right speaker setup. APPLICATION – SMALL AREA (BATHROOM, LAUNDRY ROOM) Small areas such as bathrooms and laundry rooms may not have enough room for a pair of left and right speakers.
  • Page 3: Advanced Application - Large Area, Multiple Speaker Systems

    ADVANCED APPLICATION – LARGE AREA, MULTIPLE SPEAKER SYSTEMS Large areas such as gathering rooms or banquet halls may require more than a single pair of speakers. Multiple speakers can be connected to the same amplifier channel. This application requires careful understanding of the amplifiers capabilities. 1) Determine what the minimum speaker impedance the amplifier can handle.
  • Page 4: Requirements - Speaker Placement

    REQUIREMENTS – SPEAKER PLACEMENT The best sound can be achieved by making sure the speakers are placed is the best position possible. The surface material should be similar for right and left pairs. Also, the cavity volume behind each speaker should be identical. Placing a speaker near a corner tends to emphasize bass.
  • Page 5: New Construction Installation

    NEW CONSTRUCTION INSTALLATION The preferred method for new construction installation is using Xantech’s new-construction brackets. The brackets provide an installation process that protects the high-value speaker system. The bracket material is heavy-duty ABS plastic. Wings can be assembled to the frame in several locations, thus allowing the speaker system to be installed in almost any position.
  • Page 6 3) The baffle part of the speaker system can now be installed into the speaker bezel. Place the baffle into the bezel frame. Use the dog-ears on the speaker bezel to secure the system into place. 4) Installation complete! The benefit of using the new construction speaker brackets is that you can maintain possession of the high-value portion of the speaker system instead of passing it through several different contractors.
  • Page 7: Existing Construction Installation

    EXISTING CONSTRUCTION INSTALLATION 1) Determine the location for the installed speaker. Use a stud-finder to locate the studs behind the wall. It is a good idea to use a voltage detector to determine if any live wiring is in the area. Typically an electrical or switch outlet will identify the location of a stud.
  • Page 8: Installation Complete

    5) Connect the speaker wires to the speaker and place the speaker inside the wall cavity. 6) Carefully tighten the clamping screws. Be sure to alternate diagonally between each screw position. For wall speakers, carefully adjust the frame level after each screw is installed. CAUTION: DO NOT OVER-TIGHTEN THE SCREWS! This may cause damage to the wall and speaker system 7) INSTALLATION COMPLETE!
  • Page 9: Finishing Touch - Pivotable Tweeter

    FINISHING TOUCH – PIVOTABLE TWEETER All speaker models, except the stereo ceiling models, have pivot-able tweeters. As mentioned in the speaker placement section, the tweeter should be level to the listener’s ear. Adequate Tweeter Direction Optimum Tweeter Direction Gently push the edge of the tweeter frame to adjust the angle. Be careful not to touch the dome portion of the tweeter.
  • Page 10: Troubleshooting

    TROUBLESHOOTING 1. POLARITY It is a good idea to test the polarity of the speaker and wire connection. Testing the polarity confirms that positive (+) wire is connected to the positive (+) terminal on the speaker and amplifier. A reverse- polarity connection (positive (+) wire connected to negative (-) terminal) will result in poor speaker performance and possibly damage the system.
  • Page 11: Specifications

    SPECIFICATIONS XB525C XB525W Speaker Type: Ceiling Mount Speaker Type: Wall Mount Driver size: 5.25” Woofer / 22mm Tweeter Driver size: 5.25” Woofer / 22mm Tweeter Recommend Amplifier Power: 5-60 Watts Recommend Amplifier Power: 5-60 Watts Frequency Response: 50Hz-22kHz Frequency Response: 50Hz-22kHz Impedance: 6 or 8 ohm selectable Impedance: 6 or 8 ohm selectable Sensitivity (1Watt/1Meter): 90dB...
  • Page 12 This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Xantech Corporation. Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions made in this document. 08905092C...

Table of Contents