Package contents • GPS Cradle • GPS Arm Bracket Mount • Vent Clips • User’s Guide Features • Hooks to your vehicle’s horizontal air vents without the use of tools • 360˚ swivel design for optimal viewing angle of your GPS •...
Page 3
To attach the arm bracket to the cradle 1. Align the T-shaped tip with the slot on the back of the cradle. 2. Press the lock down and push the T-shaped tip to the top of the slot until it locks with a click. If you want to remove the bracket from the cradle, press the lock to release it from the slot.
Page 4
To attach the vent clips to the cradle 1. Align the T-shaped tip with the slot on the back of the cradle. 2. Push the T-shaped tip to the top of the slot until it locks with a click. T-shaped tip Stabilizer...
Page 5
Connect the mount Attach to the windshield 1. Clean the surface of your windshield. 2. With the lever pointing toward the cradle, peel the film from the bottom of the suction cup. 3. Press the suction cup onto the windshield, and then push the lever toward the suction cup .
Page 6
Insert your GPS 1. Push the one-touch release button to open the clamping arms. 2. Unfold the cradle’s bottom arms. 3. Insert your GPS so that it rests securely on the cradle’s bottom arms. Adjust the angle of the arms to avoid blocking the power jack, button, and card reader slot on the bottom of your GPS.
Remove the mount Remove from the windshield Pull the lever toward the cradle and then pull the handle on the suction cup away from the car’s windshield. Remove from the vent Move the stabilizer away from the vent and push the vent clip springs to release and unhook from the vent.
Page 8
Should a problem occur that is covered by this warranty, take the product and the sales receipt as proof of purchase date to the place of purchase. Ignition L.P . will, at its option, unless otherwise provided by law: (a) repair the product without charge for parts and labor;...