Motion Detection Setup - Piczel 5170 Owner's Manual

3.9.2.3 Press " Left " or " Right ": Select DWELL on the screen
3.9.2.4 Press "Up" or "Down": Select ON/OFF on the screen
3.9.2.5 Press "MENU": Confirm and exit the dwell setting
3.9.2.6 Press "MENU": Exit the channel setup
3.9.3 (Brightness) /
3.9.3.1 Press "Up" or "Down": Select channel in the Channel setup
3.9.3.2 Press "ENTER" Enter the channel setup
3.9.3.3 Press " Left " or " Right ": Select brightness/contrast/color on the screen
3.9.3.4 Press "Up" or "Down": Set up 0~9 on the screen.
3.9.3.5 Press "MENU ": Confirm and exit the brightness/contrast/color setting.
3.9.3.6 Press "MENU": Exit the channel setup
3.9.4 ALARM
3.9.4.1 Press "Up" or "Down": Select channel in the Channel setup
3.9.4.2 Press "ENTER" to Enter the cannel setup
3.9.4.3 Press " Left " or " Right ": Select ALARM on the screen
3.9.4.4 Press "Up" or "Down": Select LOW/OFF/HIGH for alarm polarity
3.9.4.5 Press "MENU":" Confirm and exit the alarm setting.
3.9.4.6 Press "MENU":" Exit the channel setup
3.9.5 RECORD
3.9.5.1 Press "Up" or "Down": Select channel in the Channel setup
3.9.5.2 Press "ENTER": Enter the Channel setup
3.9.5.3 Press " "Left" or "Right": Select Record on the screen.
3.9.5.4 Press "Up" or "Down": Select record method as below (Unit will only record the channel
which has been set up for EVENT/ NORMAL/ OFF)
EVENT: when an alarm input is triggered, unit will record alarming channel more
frequently. For example: normal record method is 1-2-3-4-5-......-16. In Event mode,
when CH01 is triggered, the record method will become 1-2-1-3-1-4-1-5-...-16.
NORMAL: when external alarm is on, unit will record normally as set up.
OFF: DMR will not record
3.9.5 Press "MENU": Confirm and exit the record setting
3.9.6 Press "MENU": Exit the channel setup
3.10

MOTION DETECTION setup

(Contrast) / (Color): video adjustment of each channel
33