Advertisement
termo rs-e
termo rs-m
The Termo RS can be used as an
additional, parallel source of heating, or
as an independent heat source.
Both versions of the Termo RS are
compact and easy to install.
Features include an easy to read digital
temperature display, state of the art PCB
control panel and a RCD safety switch.
The Termo RS-E version boiler is supplied
with inbuilt heating curve software,
outside temperature sensor and a hot
water cylinder sensor. Further information
about heating curves can be found on
page 9.
1
Primary flow to heating and cylinder
2
Combined heating and cylinder primary return
3
Boiler case
4
Boiler
5
Armaflex insulation
6
Electric elements
7
Control panel
8
Mains power entry
9
Contactors
10 Charge and discharge valve
The Termo RS can be used with the OSO cascade power limiter
(see page 10 for details).
4
Advertisement
