Table of Contents
Advertisement
Charging the Battery
The battery charges while your tablet device is plugged in. Charging time will vary depending on how you use
your tablet device.
1. Plug the AC power cord (mains lead) into the AC adapter.
2. Plug the other end of the AC power cord (mains lead) into an AC outlet (wall socket).
3. Turn over your tablet device, and then plug the AC adapter into the charge connector of your tablet device in
the direction shown below.
The charge indicator shows the battery charging status.
Hint
Using the designated Sony cradle (SGPDS1, sold separately) for your tablet device allows you to charge the
battery easier.
Checking the remaining battery level/charging status
You can check the remaining battery level with the icon displayed on the status bar on the Home screen.
The charge indicator tells you the charging status. The charge indicator lights up in different colors, depending on
the remaining battery level.
Charging status
With the AC adapter
Without the AC adapter
Note
Remaining battery level Display status
Low (0 - 15 %)
Mid (16 - 89 %)
Full (90 - 100 %)
Low (0 - 15 %)
Mid (16 - 89 %)
Full (90 - 100 %)
Red
Orange
Green
Red flashing
Off
Off
Advertisement
Table of Contents
