System Setup - Naxa ND-851 Instruction Manual

Setup Menus:
In stop playback mode, press the SETUP button, the setting menu will appear on the screen as below. Using
the Direction buttons to select and highlight the function you need to set. Press the Direction
Press the Direction , buttons to set. Press the ENTER button to confirm the selection. Press the SET UP
button to save the settings and exit.
In Language Setup Page:
Press the irection buttons , D
as desire then press the Direction button
1. If OSD (On Screen Display Language) is selected, press the Direction button
Direction buttons
the selection. Press the SET UP button to save the setting and exit.
2. If Menu, Audio or Subtitle is selected, press the Direction button
buttons , to select the desired language. Then press the Enter button to confirm the
selections. Press the SET UP button to save the setting and exit. This is not available on all discs.
In Screen Setup Page:
Press the Direction buttons
As desire then press the Direction button
1. If TV type is selected, press the Direction button
4:3 PS; 4:3 LB or 16:9 to match the aspect ratio of your TV then press the Enter button to confirm
the selection. Press the SETUP button to save the setting and exit.
Notes:
4:3 PS: Select when the unit is connected to an external conventional TV. Video material formatted in the Pan
Scan style is played back in that style (the left and right edges are cut off).
4:3 LB: Select when watching DVDs on connected unit to an external conventional TV. Wide-screen images
are shown on the screen with a Black band at the top or bottom.
16:9: Select when the unit is connected to an external wide-screen TV.

SYSTEM SETUP

to select OSD menu, DVD menu, Audio Language and Subtitle
to enter.
, to select the desired language then press the Enter button to confirm
, to select TV Type, Screen Saver, TV System, Video Output,
to enter.
to enter. Press the Direction
to enter. Press the Direction buttons
-15-
button to enter.
to enter. Press the
Brightness or Contrast
, to select