Specifications - Extech Instruments CO100 User Manual

9. ESC button
Press this button to exit the current mode.
10. AC adaptor socket
11. Power ON LED
Backlight
Touch the button area below the LCD and the backlight will turn on. It will turn off automatically
after 20 seconds of inactivity. Press "ESC" button at any time to exit the function.
Maintenance
1. The meter should be cleaned with a damp cloth and mild detergent when necessary. Do not use
solvents or abrasives.
2. Store the meter in an area with moderate temperature and humidity.

Specifications

Function
CO
2
Temperature
Humidity
Display
Sampling Interval:
Overload Indication:
Sensor Type
Operating Conditions
Storage Conditions
Power Supply
Dimensions / Weight
All rights reserved including the right of reproduction in whole or in part in any form.
Range
0 to 9999ppm
23 to 122°F
(-5°C to 50°C)
0.1 to 90.0%
LCD with backlighting
2 seconds
"-OL-"
CO : NDIR (non-dispersive infrared) technology
2
-5°C to 50 °C (23 oF to 122 oF) at < 90 % RH
-5°C to 50 °C (23 oF to 122 oF) at < 90 % RH
110V～220V AC, output 6.0V DC ≥ 500mA (supplied)
117x102x102mm (4.6x4x4"); 204g (7.2 oz.)
Copyright © 2013 FLIR Systems, Inc.
www.extech.com
Resolution Accuracy
1ppm ±75 ppm or ±5% of reading
0.1° ±1.5°C/2.7°F
0.1% ±5%
3 CO100-EU-EN v2.1 7/13