Advertisement

Irvine, CA, 92614, U.S.A.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AMPRO 350 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SECO-LARM AMPRO 350

  • Page 1 Irvine, CA, 92614, U.S.A.
  • Page 2 From the moment you purchased this Vehicle Security System, you became a part of the SECO-LARM family. You started taking advantage of over 27 years of advanced security engineering. You joined a team of engineers, technicians, designers, and people like yourself who know how important protecting your car is.
  • Page 3: Table Of Contents

    Transmitter Functions ....... 3 Dual-stage Shock Sensor ....8 Arming .......... 4 Starter Disable ........ 9 Zone Bypass ........5 2nd and 3rd Channel Outputs ..9 Sensor Bypass ........ 5 Power Door Locks ......9 Armed ........... 5 Domelight Supervision ....9 Emergency Call for Help (Panic) ..
  • Page 4: Arming

    There are three different ways to arm your Testing (Q.Q.T.™), and it prevents you from alarm. Tell your dealer which is best for you: thinking your alarm is armed when it may not be. In this case, double-check that all the doors, as well as the hood and trunk, are closed properly, and that your vehicle's Turn your ignition OFF.
  • Page 5: Zone Bypass

    When you press button #1 to arm the alarm, open, or because its pin switch is broken). and the alarm responds with three chirps and If the bypassed door is later closed, it will three light flashes, there are two possibilities: be restored (no siren chirp or light flash).
  • Page 6 While your alarm is armed, your car is The starter disable prevents the car from protected in the following ways: being started. Potential thieves or vandals will be If the shock sensor detects light taps on the deterred by the flashing LED. car, it will trigger the pre-intrusion alert (the siren chirps three times and the If anyone opens a door, the alarm will...
  • Page 7: Emergency Disarm

    Any time your alarm is triggered (the siren is NOTE — If a door was open when you sounding and the parking lights are flashing), pressed transmitter button #1, the siren chirps press transmitter button #1 once to shut the three times and the parking lights flash three siren and flashing parking lights OFF while times to confirm it is not protected (see ZONE...
  • Page 8: Valet

    Sometimes you may not wish your alarm to when you use emergency disarm. See arm when you leave your vehicle. (For EMERGENCY DISARM on page 7). instance, if you leave your car with a valet attendant, you may not want to teach him how To exit valet, just turn the ignition ON and, the alarm operates.) If your alarm is set for within 15 sec., press and release the VEPLe...
  • Page 9: Starter Disable

    With this optional feature, while your alarm is automatically engages the starter disable 10 armed, your car will not start, even if a thief minutes after you disarmed the alarm or has your keys. turned the ignition switch OFF. The LED stays ON constantly to show ASD is engaged.
  • Page 10 With this feature, your transmitters can control simultaneously may operate alarms in two cars. Operation for both cars is 3rd channel in both cars at the same, except that the functions of button the same time. (Ask your #1 and button #2 are switched in the second dealer.) car.
  • Page 11 — Flashes quickly — during the 30-second rearm or passive Flashes one or more times after alarm arming countdown. disarmed to indicate which zone triggered. — OFF when a — ON while hardwired door is opened during the 30- transmitter button is pressed. second rearm or passive arming —...
  • Page 12: Accessories

    ® Your dealer has a wide variety of other accessories which can increase your alarm's security and convenience. Ask for more information. And insist on genuine SECO-LARM accessories! NOTE — The accessories on this page are optional. G:\MANUALS\AMPRO\350 OMU PM5...

Table of Contents