Micro Innovations micro wireless link User Manual page 2

Important Tips Before Using
Regarding Infrared (IR) Transmittal
Your new keyboard communicates with your PDA through IR technology (Infrared).
To function properly, the two devices need to see each other. For most PDAs,
the IR receiver is located at the top and cannot be seen by the keyboard.
For this situation use the PDA Stand included in your package. See Setting up the
PDA Stand — Page 9.
Beaming While Typing
You cannot beam or Hotsync" while the keyboard is enabled. See Enabling the
PDA Keyboard under User Setup Procedures — Page 7.
Switch Off Your PDA Before Closing the Keyboard
You should turn the PDA off or remove the keyboard from the line of sight of the
IR before closing the keyboard. Not doing so may cause the PDA to freeze as
transmissions may occur as the keys are depressed while closing. Should the
PDA freeze while closing simply open the keyboard, position it for line of sight and
tap the Function key.
Use of Trademarks
Pocketop is a trademark of Pocketop Computer Corporation.˚Palm OS and Palm are
registered trademarks of Palm, Inc. PocketPC is a trademark of Microsoft
Corporation. Other products or service names mentioned herein are the trademarks
of their respective owners.˚
2