Related Manuals for FINIS AQUAPULSE
Summary of Contents for FINIS AQUAPULSE
- Page 1 AQUAPULSE Instruction Manual Please read through the entire instruction manual before use. For more support information visit us at: Support.FINISinc.com...
-
Page 2: Table Of Contents
Table of Contents About the AquaPulse™ Device Layout Charging Basic Functions Turn ON/OFF; Adjust the Volume Set the Time Period Instantaneous; Attaching the Device Troubleshooting Helpful Notes; Technical Support Searching Care; Caution... -
Page 3: About The Aquapulse
Infrared Sensors. The result is a new monitor specifically designed for the swimming world. The main housing of the AquaPulse™ attaches easily to any goggle strap, with the small infrared sensor clipped to the swimmer’s earlobe. The heart rate is picked up through the... -
Page 4: Device Layout
Device Layout USB CONNECTOR INFRARED EAR CLIP SENSOR GOGGLE CLIP INCREASE (+) INSTANT / POWER DECREASE (–) -
Page 5: Charging
Carefully remove the AquaPulse™ and replace the cap. Note: The computer will not recognize the AquaPulse™ as it is not a memory storage device. The computer or wall adapter is used only for re-charging the internal battery. -
Page 6: Basic Functions
Basic Functions Turn ON the AquaPulse™ Press and hold the INSTANT/POWER button for 3 seconds The AquaPulse™ will give out a “Hello” greeting, and you can release the INSTANT/POWER button The AquaPulse™ will also announce the current time period interval (for example: “Time Period 30 Seconds”) -
Page 7: Set The Time Period
AquaPulse™, release the INCREASE (+) or DECREASE (–) button The AquaPulse™ will then give your current heart rate at the set time interval. The AquaPulse™ can be set at any of the following intervals: 10 Seconds 1 Minute 20 Seconds... -
Page 8: Instantaneous; Attaching The Device
Instantaneous Heart Rate At any time, you can have the AquaPulse™ repeat your most recent heart rate value. Press and release the INSTANT/POWER button Upon release, the AquaPulse™ will give your last recorded heart rate If there is not enough information to retrieve an instant heart rate, the AquaPulse™... -
Page 9: Troubleshooting
Troubleshooting Helpful Notes The AquaPulse™ gives your heart rate in standard beats-per-minute format The AquaPulse™ will say “Searching” if no heart rate is sensed (see page 10) For battery saving, the AquaPulse™ turns off automatically if no heart rate is sensed... -
Page 10: Searching
If using the Instantaneous function, the “Searching” voice command may be emitted if the AquaPulse™ has not had enough time to record and calculate an accurate heart rate If the AquaPulse™ continues “Searching”,... -
Page 11: Care; Caution
Do not bend the infrared or goggle clip; the AquaPulse™ must maintain a secure connection Rinse the AquaPulse™ in fresh water after use; be sure to take the USB cap off and rinse the USB plug as well Pat dry and store indoors in a cool, dry environment Do NOT place the AquaPulse™... - Page 12 ©2011 FINIS, inc. All rights reserved...