Table of Contents
Advertisement
5. If a selection other than GO BACK
is made and the audio control dial is
pressed, SURE ? NO is displayed.
6. Rotate the audio control dial clockwise
and switch the display to SURE ?
YES .
NOTE
The display changes as follows depending on
whether the audio control dial is rotated
clockwise or counterclockwise.
-Clockwise: SURE ? YES displayed
-Counterclockwise: SURE ? NO displayed
7. Press the audio control dial to delete
the selected device.
NOTE
Select GO BACK and press the audio
control dial to return to the PAIR DELETE
display.
8. PAIR DELETED is displayed for
three seconds after the deletion is
completed, and then it returns to the
normal display.
NOTE
If an error occurs while trying to delete the
programmed device, Err flashes in the
display for three seconds and the display
returns to LINK DELETE .
Bluetooth audio device information
display
1. Using the audio control dial, select the
pair device information display mode
DEVICE INFO in the BT SETUP
mode. (Refer to
Bluetooth audio device set-up for
details.)
2. Press the audio control dial to
determine the mode.
Bluetooth Audio
3. The name of the Bluetooth unit device
is displayed.
4. Rotate the audio control dial to select
the information for the Bluetooth unit
which you would like to view.
NOTE
When GO BACK is selected and the audio
control dial is pressed, the display returns to
DEVICE INFO .
qHow to Use the Bluetooth Audio
System
Switching to Bluetooth audio mode
To listen to music or voice audio recorded
to a Bluetooth audio device, switch to the
Bluetooth audio mode to operate the
audio device using the audio system
control panel.
Any Bluetooth audio device must be
programmed to the vehicle's Bluetooth
unit before it can be used. (Refer to
Bluetooth audio device programming )
1. Switch the ignition to ACC or ON.
Interior Comfort
Device name
BT address
6-69
Advertisement
Chapters
Table of Contents
