Husqvarna HU725AWD/BBC / 961430104 Operator's Manual

Husqvarna HU725AWD/BBC / 961430104 Operator's Manual

Walk-behind mowers
Hide thumbs Also See for HU725AWD/BBC / 961430104:

Advertisement

Available languages

Available languages

Gasoline containing up to 10% ethanol (E10) is accept-
able for use in this machine. The use of any gasoline ex-
ceeding 10% ethanol (E10) will void the product warranty.
Esta máquina puede utilizar gasolina con un con-
tenido de hasta el 10% de etanol (E10).
El uso de una gasolina que supere el 10% de etanol
(E10) anulará la garantía del producto.
115 63 15-96
Operator's Manual
Manual de Operario
HU725AWD/BBC / 961430104
Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
Por favor lea cuidadosamente y comprenda
estas intrucciones antes de usar esta maquina.
English/Español

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Husqvarna HU725AWD/BBC / 961430104

  • Page 1 Manual de Operario Esta máquina puede utilizar gasolina con un con- tenido de hasta el 10% de etanol (E10). HU725AWD/BBC / 961430104 El uso de una gasolina que supere el 10% de etanol (E10) anulará la garantía del producto. Please read the operator's manual carefully and make sure you understand the instructions before using the machine.
  • Page 2: Safety Rules

    SAFETY RULES Safe Operation Practices for Walk-Behind Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • See manufacturer’s instructions for proper operation Look for this symbol to point out im- and installation of accessories.
  • Page 3: Table Of Contents

    1.6 Quarts Should you experience any problem you cannot easily and Type: (Unleaded Regular Only) remedy, please contact your nearest Husqvarna or other Oil Type (API SG–SL): SAE 30 (above 0°C/32°F); authorized service center/department. We have competent, SAE 5W-30 (below 0°C/32°F) well-trained tech ni cians and the proper tools to service or repair this lawn mower.
  • Page 4: Assembly

    ASSEMBLY Read these instructions and this man u al in its entirety before you attempt to assemble or operate your new lawn mow er. OPERATOR MOWING PRESENCE PO SI TION IMPORTANT: THIS LAWN MOWER IS SHIPPED WITH- CONTROL OUT OIL OR GASOLINE IN THE ENGINE. Your new lawn mower has been as sem bled at the factory LIFT with the ex cep tion of those parts left unassembled for ship-...
  • Page 5: Assembly

    ASSEMBLY TO ASSEMBLE GRASS CATCHER INSTALL STARTER ROPE (See Fig. 4) (See Fig. 3) 1. Loosen T-knob. 1. Put grass catcher frame into grass bag with rigid part 2. Place throttle control in STOP position. of bag on the bottom. Make sure the frame handle is 3.
  • Page 6: Operation

    (E10) will void the product warranty. MEETS CPSC SAFETY REQUIREMENTS Husqvarna rotary walk-behind power lawn mowers conform to the safety standards of the American National Standards Institute and the U.S. Consumer Product Safety Commission. OPERATOR PRESENCE CONTROL BAR – must be THROTTLE / ENGINE CONTROL –...
  • Page 7: How To Use Your Lawn Mower

    OPERATION The operation of any lawn mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or per- forming any adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask over spectacles.
  • Page 8 OPERATION DRIVE CONTROL (See Fig. 7) • Self-propelling is controlled by pulling either drive control lever rearward to the handle. The further toward the handle a lever is pulled, the faster the unit will travel. • To stop forward motion without stop ping blade, re lease a drive control lever.
  • Page 9: To Convert Mower

    OPERATION TO CONVERT MOWER SIDE DIS CHARG ING (See Fig. 11) Your lawn mower was shipped ready to be used as a • Rear door must be closed. mulcher. To convert to bagging or discharging: • Open mulcher door and install dis charge defl ector under door as shown.
  • Page 10: Before Starting Engine

    OPERATION TO EMPTY GRASS CATCHER (See Fig. 12) GASOLINE 1. Lift up on grass catcher using the frame han dle. OIL FILL CAP/ FILLER CAP DIPSTICK 2. Remove grass catcher with clippings from under lawn mower han dle. 3. Empty clippings from bag using both frame handle and bag handle.
  • Page 11: Operation

    OPERATION • For extremely heavy cutting, reduce the width of cut TO STOP ENGINE (See Fig. 14) by overlapping previously cut path and mow slowly. • To stop engine, place throttle/engine control in STOP • For better grass bagging and most cutting conditions, position.
  • Page 12: Maintenance Schedule

    MAINTENANCE BEFORE AFTER EVERY EVERY EVERY BEFORE EACH EACH 25 HOURS STORAGE HOURS OR SEASON HOURS Check for Loose Fasteners Clean / Inspect Grass Catcher * Check Tires Check Drive Wheels *** Clean Lawn Mower **** Clean under Drive Cover *** Check Drive Belt / Pulleys *** Check / Sharpen / Replace Blade Lubrication...
  • Page 13: Lawn Mower

    MAINTENANCE LAWN MOWER IMPORTANT: BLADE BOLTS ARE HEAT TREATED. IF BOLTS NEED REPLACING, REPLACE ONLY WITH APPROVED BOLTS. Always observe safety rules when performing any main- te nance. TIRES • Keep tires free of gasoline, oil, or insect control chem- i cals which can harm rubber.
  • Page 14: To Change Engine Oil

    MAINTENANCE NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) AIR FILTER (See Fig. 18) improve starting in cold weather, these multi-viscosity oils Your engine will not run properly and may be damaged will result in increased oil consumption when used above by using a dirty air fi...
  • Page 15: Maintenance

    MAINTENANCE CLEANING IMPORTANT: FOR BEST PERFORMANCE, KEEP MOWER HOSE HOUSING FREE OF BUILT-UP GRASS AND TRASH. CLEAN THE UNDERSIDE OF YOUR MOWER AFTER EACH USE. CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. •...
  • Page 16: Service And Adjustments

    Husqvarna or other qualifi ed 3. Disconnect spark plug wire from service center for repair and ad just ment.
  • Page 17: Storage

    STORAGE Immediately prepare your mower for storage at the end of the season or if the unit will not be used for 30 days or more. BOLT LAWN MOWER KNOB When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc.
  • Page 18: Trou Ble Shoot Ing

    fl ame or spark. Allow the engine to cool before storing in any enclosure. TROUBLESHOOTING POINTS See appropriate section in manual unless directed to a Husqvarna or other authorized repair center. PROBLEM CAUSE CORRECTION Does not start 1.
  • Page 19: Trou Ble Shoot Ing

    TROUBLESHOOTING POINTS See appropriate section in manual unless directed to a Husqvarna or other authorized repair center. PROBLEM CAUSE CORRECTION Loss of power 1. Rear of lawn mower housing or cutting 1. Raise cutting height. blade dragging in heavy grass.
  • Page 20 (a) Engines and Attachments.Except where otherwise indicated on Exhibit A, all Engines and Attachments are not covered by this Limited Warranty. In most cases, these items are NOT manufactured by Husqvarna in which case they may be covered separately by their respective manufacturer's warranties if one is provided and included with the product at the time of purchase.
  • Page 21 10. Authorized Husqvarna Servicing Dealer/Center. In order to obtain warranty coverage it is your responsibility (at your expense) to deliver or ship your Husqvarna unit to an authorized Husqvarna Servicing Dealer/Center and arrange for pick-up or return of your unit after the repairs have been made.
  • Page 22: Warranty

    Riding Lawn Tractors: Frame, Chassis, Front Axle 5 Years No Warranty No Warranty Engine* Transmission (if made by Husqvarna/Peerless) 3 Years No Warranty No Warranty Transmission (if third party)** XLS Models only - stamped deck shell. Armor Protected Limited Warranty...
  • Page 23 ** See reference 1 (b) of the warranty statement. RZ - Two (2) Year Consumer warranty, parts & labor, with Hydro-Gear Distributor network. EZ - One (1) Year Commercial warranty, parts & labor, with Husqvarna. Two (2) Year Consumer warranty, parts & labor, with Hydro-Gear Distributor network.
  • Page 24: Reglas De Seguridad

    REGLAS DE SEGURIDAD IMPORTANTE: ESTA MAQUINA CORTADORA ES CAPAZ DE AMPUTAR LAS MANOS Y LOS PIES Y DE LANZAR OBJETOS. SI NO SE OBSERVAN LAS INSTRUCCIONES DE SEGURIDAD SIGUIENTES SE PUEDEN PRODUCIR LESIONES GRAVES O LA MUERTE. • Detenga la cuchilla o las cuchillas cuando cruce por calzadas, Busque este símbolo que señala las precau- calles o caminos de grava.
  • Page 25: Especificaciones Del Producto

    Ponga en conocimiento de los demás que está cortando el césped. V. SERVICIO • Nunca haga funcionar una máquina dentro de un área cer- IV. MANEJO SEGURO DE GASOLINA rada. Usar mucha atención cuando se maneja gasolina. La gasolina es •...
  • Page 26: Montaje/Pre Operación

    MONTAJE / PRE-OPERACIÓN Lea estas instrucciones y el manual completamente antes de BARRA DE POSICIÓN tratar de montar u operar su segadora nueva. IMPORTANTE: CONTROL PARA Este cortacesped viene SIN ACEITE O GASOLINA en el mo- QUE EXIGE LA SEGAR tor.
  • Page 27 MONTAJE / PRE-OPERACIÓN PARA MONTAR EL RECOGEDOR DE CÉSPED INSTALACIÓN DEL CORDÓN ARRANCADOR (Vea Fig. 3) (Vea Fig. 4) Ponga el bastidor del recogedor de césped en la bolsa del Afl oje una manilla-T. césped con la parte rígida de la bolsa en la parte inferior. Mueva la palanca de control de aceleración del motor a la Asegúrese que el mango del bastidor esté...
  • Page 28: Operación

    OPERACIÓN FAMILIARÍCESE CON SU SEGADORA LEA ESTE MANUAL DEL DUEÑO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU SEGADORA. Compare las ilustraciones con su segadora para familiarizarse con la ubicación de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Estos símbolos pueden apareser sobre su segadora o en la literatura proporcionada con el producto.
  • Page 29 OPERACIÓN La operación de cualquier segadora puede hacer que salten objetos extraños dentro de sus ojos, lo que puede producir daños graves en éstos. Siempre use anteojos de seguridad o protección para los ojos mientras opere su segadora o cuando haga ajustes o reparaciones. Recomendamos gafas o una mascara de seguridad de visión amplia de seguridad usada sobre las gafas.
  • Page 30 OPERACIÓN CONTROL DE LA IMPULSIÓN (Vea Fig. 7) • La autopropulsión se controla manteniendo tirando cualquiera palanca de accionamiento atrás hacia el mango. Cuanto más lejos se tira cualquiera palanca hacia el mango, más rápida irá la unidad. • Para detener el movimiento hacia adelante sin apagar el cuchilla, soltar cualquiera palanca de accionamiento.
  • Page 31 OPERACIÓN PARA CONVERTIR LA SEGADORA DESCARGA LATERAL (Vea Fig. 11): Su segadora fue enviada lista para usarse como acolchadora • La puerta trasera tiene que estar cerrada. de capa vegetal. Para convertirla a una operación de ensacado • Abra la protección contra la descarga y instale el desviador o de descarga: de contra la descarga debajo de la protección como se DESCARGA TRASERA (Vea Fig.
  • Page 32 OPERACIÓN PARA VACIAR EL RECOGEDOR DE CÉSPED TAPA DEL TAPA DEL (Vea Fig. 12) RELLENADOR DEPOSITO DE DE GASOLINA Levante el recogedor de césped usando el mango del bas- ACEITE CON tidor. VARILLA DE NIVEL Remueva el recogedor de césped, con los recortes, de debajo del mango de la segadora.
  • Page 33 OPERACIÓN • Para un corte muy pesado, reduzca el ancho del corte PARA PARAR EL MOTOR (Vea Fig. 14) pasando parcialmente por encima del lugar anteriormente • Para parar el motor, mueva la control de aceleración/motor cortado y siegue lentamente. a la posición de STOP.
  • Page 34: Programa De Mantenimiento

    MANTENIMIENTO ANTES DESPUES CADA CADA CADA ANTES DEL DE CADA DE CADA 25 HORAS O ALMACE- HORAS TEMPORADA HORAS NAMIENTO Revisar si hay Sujetadores Sueltos Limpiar/Inspeccionar el Recogedor de Césped * Controlar los Neumáticos Controlar las Ruedas Motrices *** Limpiar la Segadora **** Limpiar debajo la Cubierta de la Transmisión *** Revisar las Correas y las Poleas Impulsadas *** Revisar / Afilar / Cambiar la Cuchilla...
  • Page 35 MANTENIMIENTO IMPORTANTE: LOS PERNOS DE LA CUCHILLA ES TRATADO SEGADORA A CALO. SI ES NECESARIO SUSTITUIR LOS PERNOS, Siempre observe las reglas de seguridad cuando haga el man- SUSTITUIRLOS SÓLO CON PERNOS APROBADOS. tenimiento. LLANTAS • Mantenga las llantas sin gasolina, aceite o substancias químicas para control de insectos que pueden dañar la goma.
  • Page 36 MANTENIMIENTO AVISO: A pesar de que los aceites de multiviscosidad (5W30, FILTRO DE AIRE (Vea Fig. 18) 10W30, etc.) mejoran el arranque en clima frío, estos aceites de Su motor puede sufrir averías y funcionar de manera incorrecta multiviscosidad van ha aumentar el consumo de aceite cuando con un fi...
  • Page 37 MANTENIMIENTO LIMPIEZA PRECAUCIÓN: No quite la manguera de IMPORTANTE: PARA OBTENER EL MEJOR RENDIMIENTO, la guarnición mientras que el motor está MANTENGA LA CAJA DE LA SEGADORA SIN ACUMULACION funcionando. El agua en motor puede dar DE CESPED Y BASURA. LIMPIN LA PARTE DE ABAJO DE SU lugar a vida acortada del motor.
  • Page 38: Servicio Y Ajustes

    Husqvarna o con un otro centro de servicio cualifi cado. 3. Desconecte el alambre de la bujía y póngalo en CARBURADOR donde no pueda entrar en contacto con ésta.
  • Page 39: Almacenamiento

    ALMACENAMIENTO Inmediatamente prepare su segadora para el almacenamiento al fi nal de cada temporada o si la unidad no se va a usar por 30 PERNO días o más. SEGADORA MANILLA Cuando se va a guardar la segadora por cierto período de tiempo, límpiela cuidadosamente, remueva toda la mugre, la grasa, las hojas, etc.
  • Page 40: Identificación De Problemas

    IMPORTANTE: NUNCA CUBRA LA SEGADORA MIENTRAS EL MOTOR Y LAS AREAS DE ESCAPE TO DAVIA ESTAN CALIENTES. SOLUCIÓN DE PROBLEMAS Vea la sección apropiada en el manual amenos que esté dirigido a un centro de servico Husqvarna. PROBLEMA CAUSA CORRECCIÓN No arranca Filtro de aire sucio.
  • Page 41 SOLUCIÓN DE PROBLEMAS Vea la sección apropiada en el manual amenos que esté dirigido a un centro de servico Husqvarna. PROBLEMA CAUSA CORRECCIÓN Falta de Cuchilla desgastada, doblada o suelta. Eleve la altura de corte. fuerza Altura de las ruedas dispareja.
  • Page 42: Garantia

    (a) Motores y accesorios.A excepción de los casos en que se indica otra cosa en el Anexo A, todos los motores y accesorios no están cubiertos por esta garantía limitada. En la mayoría de los casos, estos elementos NO han sido fabricados por Husqvarna, en cuyo caso pueden estar cubiertos por separado por la garantía de sus respectivos fabricantes, si tal garantía se proporciona e incluye con el...
  • Page 43 Si desconoce la ubicación del concesionario de servicio Husqvarna autorizado más cercano, llame a Husqvarna al 1-800-487-5951 de 8:00 a.m. a 8:00 p.m., Hora Estándar del Este, o visite www.husqvarna.com.
  • Page 44 11. Documentación requerida. Debe conservar y presentar este Comprobante de compra (que incluya la fecha, el modelo del pro- ducto y, si corresponde, el número de serie del motor) a un concesionario de servicio Husqvarna autorizado para obtener el servicio de garantía bajo esta Garantía limitada.
  • Page 45 RZ – Dos (2) años de garantía al consumidor, piezas y mano de obra, con red de distribuidores Hydro-Gear. EZ – Un (1) año de garantía comercial, piezas y mano de obra, con Husqvarna. Dos (2) años de garantía al consumidor, piezas y mano de obra, con red de distribuidores Hydro-Gear.
  • Page 46 SERVICE NOTES...
  • Page 47 NOTAS SERVICIO...
  • Page 48 11/22/2013 BY...

This manual is also suitable for:

Hu725bbcHu725awd961430104

Table of Contents