How To Listen To The Radio; How To Make A Phone Call - Kenwood DNN9350BT Quick Start Manual

How to Listen to the Radio

1
Press the <HOME> button twice to the
Source launcher panel.
2
Touch [ ] in the Source launcher panel.
3
Touch [TUNER].
The unit switches to the Radio tuner source.
4
Operate on the source control screen.
⿠Station search
1) Touch [ ].
Sub function menu appears.
2) Touch [AM] or [FM] to select the band.)
3) Touch [4] or [¢] to tune in the desired
station.
⿠Auto memory
1) Touch [ ].
Sub function menu appears.
2) Touch [AM] or [FM] to select the band.
3) Touch [ ].
4) Touch [AME].
5) Touch [4] or [¢] in the sub function
menu.
Auto memory starts.
⿠Recalling the preset station
1) Touch [P#].
You can also display the preset list by
touching the frequency display in the center.
✎
NOTE
• For other operations, see Radio Basic Operation
(P.88) in the Instruction Manual.
18
ñ English

How to Make a Phone Call

You can use your Bluetooth cell-phone when paired
to this unit.
1
Register your cell-phone to the unit.
Follow as the procedures shown below. For
detailed operation, see Registering the
Bluetooth Unit (P.99) in the Instruction
Manual.
1) Press the <HOME> button twice to the
Source launcher panel.
2) Touch [ ] in the Source launcher panel.
3) Touch [STANDBY].
4) Press and hold the < 6 > button.
5) Touch [ ].
6) Touch [Search].
Searched Device List screen appears.
7) Select your cell-phone from the displayed list
in the Searched Device List screen.
8) Enter PIN code form the cell-phone.
Registering is completed.
The PIN code is set to "0000" as default.
2
Connect your cell-phone to the unit.
1) Touch the device name you want to connect
in the Bluetooth SETUP screen.
2) Touch [ON] of [TEL(HFP)] in the BT
Connection Settings screen.
The selected device is connected to the unit.