Page 2
In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 0800 273 845 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au or www.kambrook.co.nz...
Page 3
Contents Kambrook Recommends Safety First Your CaptivG3 Cyclonic Bagless Vacuum Operating Instructions Care and Maintenance Troubleshooting KBV250-220-280_IB_B11.indd 3 23/08/11 10:12 AM...
Page 4
IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
Return the entire appliance to the nearest adequate space above and on all sides for air authorised Kambrook Service Centre for circulation. examination and/or repair. • Any maintenance other than cleaning should be performed at an authorised Kambrook Service Centre. KBV250-220-280_IB_B11.indd 5 23/08/11 10:12 AM...
Page 6
Your CaptivG3 Cyclonic Bagless Vacuum Bagless convenience, for easy Cyclonic cone helps separate removal of dirt and dust with no particles from the air before need for replacement bags filtering begins Variable power control Two washable HEPA filters included 1500 watt motor for superior suction, fast Auto cord rewind and effective cleaning...
Operating Instructions Before First Use Fully extend the power cord by pulling the power plug out from the rear of Remove any promotional material the vacuum, until the yellow tape on from the vacuum cleaner. the cord is showing. When unpacking the vacuum cleaner check to see you have received all NOTE: Ensure that you do not the required components, such as the...
Operating Instructions continued Variable Power Control Set the variable speed control between minimum and medium The power booster lever on the power when using the tool vacuum can be used for variable accessories. power control. Slide the lever toward the MAX marking for vacuuming hard Hard Floor Tool (KBV280 floor and carpet surfaces.
Care and Maintenance Check all filters and replace them regularly. It is recommended to clean the filters after every use. For normal household vacuuming the filters should be replaced at least twice a year. If you encounter reduced vacuum cleaner performance, check: •...
Care and Maintenance continued Cleaning and Replacing Filters To assist you with the regular care of your vacuum, a second HEPA filter is supplied for convenient use, ideal for when a dirty filter is being cleaned. Dirty and clogged filters may result in reduced suction performance.
Page 11
Simply place the foam filter into NOTE: Do not dry in a tumble the back of the HEPA filter and dryer, microwave, oven or near then click the filter assembly into a naked flame. The filter and the back of the dust container. filter case must be completely dry before replacing into the vacuum.
Care and Maintenance continued Shake and tap the cone until IMPORTANT: Dirty all the fine dust particles are and clogged filters removed. The cone can also be may result in reduced hand washed. Allow the cone to completely air dry before re- suction performance.
• Empty and clean the • Dust container is full dust container Spare Parts To order spare parts for your Kambrook CaptivG3 Cyclonic Bagless Vacuum please contact Customer Service on: 1300 139 798 (Australia) and 0800 273 845 (New Zealand) KBV250-220-280_IB_B11.indd 13...
Page 16
Kambrook - Australia Kambrook - New Zealand Building 2, Port Air Industrial Estate Private Bag 94411 1A Hale Street Botany, Manukau Botany NSW 2019 Auckland 2163 Australia New Zealand Customer Service Line 1300 139 798 Customer Service Line/ Customer Service Fax 1800 621 337...