Table of Contents
Advertisement
Additional Menus
When the unit is mounted on the digital camera, an additional menu will appear in the digital
camera's display.
Be sure to read the digital camera's manual together with this document.
yMenu settings are registered to the digital camera when you turn it off.
y
Motion Picture
Interface Unit
Audio Input Select
SDI Remote
Recording
LED Brightness
3G-SDI Type
Low Battery Alert
12
VQT5K48 (ENG)
Settings for the interface unit
Select the audio to input to the digital camera.
y[BODY]:
y
Input audio from the digital camera's internal microphone or from the
external microphone connected to the digital camera.
y[XLR]:
y
Input audio from the equipment connected to this unit's AUDIO IN
[CH1, CH2] terminals.
When this is selected, the [Lens Noise Cut] setting will be fixed at
[OFF].
Select whether to output control information for recording start/stop to
the external equipment connected to this unit's SDI OUT terminals.
y[ON]: Enable the function.
y
y[OFF]: Disable the function.
y
Specify the brightness of the level meters.
y[HIGH], [LOW]
y
Select the type of signal that will be used when outputting 3G-SDI
signals.
y[LEVEL A], [LEVEL B]
y
Select the voltage at which to display the low battery (voltage decline)
warning for the DC power battery.
y[11V], [12.5V], [13.5V], [15V]
y
The
indicator will turn red and blink before the battery charge is
empty.
Replace the battery when the battery charge is low and "Interface
Unit: Low Battery Alert" is displayed.
Advertisement
Table of Contents
