Table of Contents
Advertisement
"
##
You may configure Print Master to print a programmable message
and the logical name of the source computer on a separate sheet of
paper before printing any other data. You may enable or disable the
Header Page Message for each individual computer port.
Factory default is: This print job is for:, with the Header Page
Message disabled.
#
Print Master allows printer (or plotter) sharing between multiple
computers and a single printer or multiple printers. In multiple printer
applications, users may contend for the next available printer on a
first-in-first-out basis or select a specific printer. Print data is stored in
the unit's buffer and sent to the printer as it can receive the
information.
From the factory, Print Master is preset to allow multiple computers to
share one printer. The default printer port is Port 1. If your
application requires sharing multiple printers or if you will be sharing a
single printer with an interface (parallel or serial) that does not match
Port 1, you must access configuration mode and change the Port
Assignment (or Number of Printers) for the appropriate port(s).
24
Advertisement
Table of Contents
