Switching on the notebook via the port replicator
► Press the ON/OFF button on the port replicator to switch the notebook on.
The power-on indicator of the Port Replicator lights up.
Switching off notebook via Port Replicator
► Close all applications and shut down your operating system (please refer
to the manual for the operating system).
If the notebook cannot be shut down properly, press the ON/OFF button
on the Port Replicator for approx. four seconds. The notebook will switch
off. Any unsaved data may however be lost.
Disconnecting the notebook from the Port Replicator
► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch.
► Lift off the notebook (2).
Fujitsu
2
Working with the notebook
1
45