Options For Standby Mode - Topfield TBC-2010 User Manual

30 Preference Settings

4.8 Options for standby mode

by setting the Text Scroll option to anything other than Disable.
With the choice of Full Scroll, it will be fully scrolled until its
end disappears; with the choice of Part Scroll, it will be scrolled
only to its end.
You can have the current time displayed on the front display
in standby mode. Select the Settings > Others menu and set
the Standby Mode option to Active; otherwise, set it to Passive.
When you set the Standby Mode option to Active, the receiver
can also bypass the signal from the antenna. To save power
consumption, you might as well set the Automatic Power Down
option to Enable. With this option enabled, the receiver will be
turned off automatically when there is no manipulation over
three hours.