Sliding Rack Kit Assembly - Hotpoint OSX 1036U D CX Operating Instructions Manual

Sliding rack kit assembly

GB
To assemble the sliding racks:
Left
Right guide
guide rail
rail
B
C
D
at the bottom.
4. Finally, fit the frames on the spacers A.
! Do not place the sliding racks in position 5.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
18
1. Remove the two
frames, lifting them
away from the spacers
A (see figure).
A
2. Choose which shelf
to use with the sliding
rack. Paying attention
to the direction in which
the sliding rack is to be
extracted, position joint
B and then joint C on
the frame.
3. Secure the two
frames with the guide
rails using the holes
provided on the oven
walls (see diagram).
The holes for the left
frame are situated at
the top, while the holes
for the right frame are