Subscribe to Our Youtube Channel
Related Manuals for AUVIO 15-318
Summary of Contents for AUVIO 15-318
- Page 1 T H E PE RFOR MA NC E YOU NEED 4-In/1-Out HDMI Selector Switch with Remote Control Please read this user’s guide before using your new Selector Switch. User’s Guide 15-318...
-
Page 2: Package Contents
Package contents HDMI Selector Switch AC Adapter Remote Control Velcro Strips (2 pairs) User’s Guide Quick Start Features Supports full HD 1080p resolution for the best possible picture and digital sound. Connect four high-definition devices ... - Page 4 DC 5V...
-
Page 5: Connect To Power
Connect Audio/Video Devices Connect an audio device, such as a DVD player or cable box, to the input port (IN1, IN2, IN3 or IN4) of the selector switch using an HDMI cable (not included). Connect a video output device such as TV to the OUT port using an HDMI cable (not included). - Page 6 battery if the remote stops working properly. Press the tab on the battery compartment tray and slide the battery compartment tray out. Insert a new 3V, CR2025 battery, positive “+” side up. Slide the tray back into the battery compartment until it clicks. Power Choose a connected...
- Page 7 Dispose of batteries promptly and properly. Do not burn or bury them. Use only a fresh battery of the required size and type. Switch HDMI Signals Press G/SELECT once or G on the remote to turn on the selector switch.
- Page 8 If more than one input device is connected, press G/SELECT or remote buttons 1-4 to switch to the next input. Notes: If you try to switch to another HDMI port where no input is connected, the LED will flash continuously. If a new input is selected, the current ...
- Page 9 Secure Your Selector You can secure your selector switch with the supplied Velcro strips (2 pairs). Separate the Velcro strips. Stick one pair on the bottom of the selector, as shown, and the other on the surface (e.g. a wall, desk, etc.) where you want to secure your selector.
-
Page 10: Troubleshooting
Troubleshooting Problem Possible Solutions Make sure the power adapter is plugged in. doesn’t Check that the A/V light device’s power cord is plugged in properly. Try another device in case the first one isn’t No video working. or audio Make sure the HDMI cable is not damaged. -
Page 11: Specifications
Change the remote Remote control battery. control Make sure there are no does not obstructions between work the remote and switch. Make sure nothing is Unable preventing the button to switch from being pressed. input using the Switch off, unplug, and G/SELECT replug power cord, then button... -
Page 12: Fcc Information
FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. - Page 13 the product without charge for parts and labor; (b) replace the product with the same or a comparable product; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of Ignition L.P . New or reconditioned parts and products may be used in the performance of warranty service.
- Page 14 Auvio was established by a group of technophiles to provide high quality audio and video products without the high sticker price. The Auvio philosophy is for you to experience audio and video as it was intended to be: pure and distortion free.
Need help?
Do you have a question about the 15-318 and is the answer not in the manual?
Questions and answers