Behringer Eurolive ELX215S Brochure & Specs

Line Arrays
EUROLIVE ELX215S/
ELX212S/ELX82/ELX42
EUROLIVE ELX215S — 2 x 15" Compact
Fly Ready Line Array Subwoofer
Ultra-compact, high-performance,
fly ready line array subwoofer for front
of house, side fill, or delay line use
Dual 15" 4th order bandpass
subwoofer design
Ground-rumbling frequency
response with frequency range that
runs to 29 Hz
Extremely high acoustic output with
133 dB Max SPL for room filling lows
High power handling
(1200 W RMS/2400 W
Program/3600 W Peak)
Fly ready for use above an ELX82
stack or behind the array. Fly two
subs together as part of any array
with a 12:1 load factor
Tour ready impact resistant 18 AWG
perforated grille
Void-free 18 mm Baltic Birch ply
with a nearly indestructible
DuraCoat finish
Easy grip ergonomic handle design
for hassle free handling
Integrated and intuitive suspension
hardware supports flexible ground
stacking options
EUROLIVE ELX212S — Ultra-Compact
Fly Ready 2 x 12" Line Array Subwoofer
Ultra-compact, high-performance,
fly ready line array subwoofer for front
of house, side fill, or delay line use
Dual 12" 4th order band pass
subwoofer design
Ground-rumbling frequency
response with frequency range that
runs to 38 Hz
BEHRINGER, a world leader in highest-
quality passive and active loudspeakers,
now brings its extreme value proposition
to the vertical line-array marketplace
with its new ELX Series loudspeakers.
Now small to medium sized venues,
such as houses of worship, community
centers, nightclubs, as well as rental
and touring applications can enjoy truly
professional-grade performance for a
fraction of the cost of competing systems.
What's a Line-Array?
Although line array systems have
been around for more than 50 years,
they have only come into prominence
over the past few years, mainly due to
their use in large-scale concert venues.
Vertical line-arrays are created by stacking
or suspending identical loudspeaker
cabinets so the LF (Low-Frequency) and
HF (High-Frequency) drivers, are placed in
exact vertical alignment with each other.
This enables them to work together to
send sound waves much further than
a single driver could. The configuration
is designed so that you end up with a
column each of LF and HF drivers.
By using specially designed
waveguides or horns, horizontal
sound dispersion can be very wide,
while keeping the vertical alignment
extremely tight. The resulting sound
is smoother, with much more even
dispersion than that of traditional
horn-loaded loudspeaker systems.
Highest Quality Sound
BEHRINGER ELX Series loudspeakers
provide amazingly brilliant sound,
with rich and deep low-end,
smear-free mids and sparkling highs.
Capable of generating extremely high
sound pressure levels, ELX loudspeakers
utilize only the highest-quality
components and are constructed of
void-free birch plywood. The handmade
enclosures are then finished with a
special black or white DuraCoat finish,
recognized by many as the toughest
finish on the market.
Continued on next page